Product Manual

Assembly (continued)

Gun hose

Hose clamp

Hose barb

Step Eight: Attach gun to gun hose

1. Install hose clamps on hose.

i) Slide hose clamp over the end of the hose.

ii) Push the hose onto the hose barb.

iii) Slide the hose clamp over the hose barb.

iv) Tighten the hose clamp.

2. Using a 3/4" hose clamp, attach the remaining end of the gun hose to the barb on the gun inlet.

NOTE: If your vehicle battery will be inaccessible after the sprayer is attached, you will need

to proceed to "Step Ten: Connect power cords to vehicle battery" prior to performing Step Nine

below.

Step Nine: Attach sprayer to vehicle

Secure the sprayer tank to your ATV rack with the two tank straps.

ATV rack

Tank straps