Product Manual

Assembly (continued)
11
Step Four: Attach gun hose to pump
1. Install hose clamp on hose.
i) Slide hose clamp over the end of the hose.
ii) Push the hose onto the hose barb.
iii) Slide the hose clamp over the hose barb.
iv) Tighten the hose clamp
2. Using the hose clamp, attach one end of the gun hose to the pump hose barb.
Step Five: Attach hose guide to tank
1. Route gun hose around sprayer and through hose guide.
2. Attach hose guide to tank with 5/16 x 1/2" bolt.
Gun hose
3/4” Hose clamp
5/16 x 1/2” Bolt
Hose guide
Pump hose barb