Product Manual

INSTALLING THE REAR GATE (ON A SPORTSTAR IIWG, SPORTSTAR IIIWG, AND UNISTAR

TRAILERS)

On the Sportstar IIWG, Sportstar IIIWG, the rear brackets differ from the front brackets:

The rear brackets do not use a ramp retaining pin. And, both ramps mount on the front

ramp pins. Install the rear brackets using the same method as above mentioned for the rear

brackets.

Important: Install the rear brackets and side rails before installing the gate.

Once you complete the rear brackets and side rails installation by securing the front rail

brackets, you can attach the gate using the following steps:

1. Align the gate hinge.

2. Insert gate hinge pin.

3. Insert a cotter pin through the

hole in the gate hinge pin and

bend at least one leg.

4. Repeat the process with the other side.

5. Close the gate and verify the latches close firm on each

gate.

ATV Trailer Assembly Manual 12

A19

Gate Latch