Hardware Manual

North Pole Engineering © North Pole Engineering Inc. 2020

221 N 1st St, Minneapolis, MN 55401

www.npe-inc.com

612.305.0440

The GEM3NFC Module has been tested against the appropriate regulatory standards for

European market. OEMs should consult a qualified test house to ensure their product meets

all regulatory requirements.

The GEM3NFC Module Declaration of Conformities is below. Test reports are available upon

request.

Health and Safety – EN60950-1: 2006+A11:2009+A1:2010+A12:2011

Electromagnetic compatibility – EN301489-17 V2.2.1 in accordance with EN 301 489-1

V1.9.2

Radio Frequency Radiated Emissions: EN300 328 V1.9.1

North Pole Engineering declares under our sole responsibility that the essential radio tests

have been carried out and that the GEM Module to which this declaration relates is in

conformity with all applicable essential requirements of Article 3 of the EU Directive

1999/5/EC when used for its intended purpose.

Place of Issue: North Pole Engineering

221 North First Street, Suite 310

Minneapolis, MN 55401

Bluetooth Qualification

The Bluetooth SIG requires every product implementing Bluetooth technology to have a

Declaration ID even though the end product references a Bluetooth design with its own

Declaration ID.

An over of the Bluetooth SIG Qualification Process is as follows:

1. Register as a member of the Bluetooth SIG – www.bluetooth.org

2. Go to product listing page https://www.bluetooth.org/en-us/test-

qualification/qualification-overview

3. Go to Create a Listing: https://www.bluetooth.org/tpg/QLI_SDoc.cfm

4. In the area “Reference a Qualified Design, Enter End Product ID: 77930

5. Select your Declaration ID or Purchase a Declaration ID. Fees for Declaration IDs

vary based on Bluetooth SIG membership level.

6. Once you have completed your listing and paid your declaration fee, your design will

be listed on the Blueooth SIG website.