Integration Guide

GEM3 Module Hardware Integration Guide Version 0.1
North Pole Engineering
221 N 1st St, Minneapolis, MN 55401
www.npe-inc.com
612.305.0440
8.3 BLUETOOTH QUALIFICATION
The GEM3 module has been listed with the Bluetooth Special Interest Group (SIG) as a qualified
an End Product.
The Bluetooth SIG requires every product implementing Bluetooth technology to have a
Declaration ID even though the end product references a Bluetooth design with its own
Declaration ID.
An over of the Bluetooth SIG Qualification Process is as follows:
1. Register as a member of the Bluetooth SIG – www.bluetooth.org
2. Go to product listing page https://www.bluetooth.org/en-us/test-
qualification/qualification-overview
3. Go to Create a Listing: https://www.bluetooth.org/tpg/QLI_SDoc.cfm
4. In the area “Reference a Qualified Design, Enter End Product ID: 77930
5. Select your Declaration ID or Purchase a Declaration ID. Fees for Declaration IDs vary based
on Bluetooth SIG membership level.
6. Once you have completed your listing and paid your declaration fee, your design will be
listed on the Bluetooth SIG website.
You can find more details on the Bluetooth SIG listing process at the following webpage:
https://www.bluetooth.org/en-us/test-qualification/qualification-overview
9 ORDERING DETAILS
Part Number
Reel Size
MOQ
Multiple
GEMSRB030X
500 pieces
500
500
10 FURTHER ASSISTANCE
Please contact North Pole Engineering at 1-612-305-0440 or via email at [e-mail] if
additional help is needed.