Operation Manual

61
User Option menu
7. Do one of the following:
• Press the Up soft key to return to the
previous menu and choose another
option.
• Press the Power Off/End Call key
to exit all menus and return to the
standby state.
Note: You can also press the Exit soft
key from the top-level menu to exit and
return to the active (off-hook) state.
To enable or disable Push-to-Talk:
1. Press and hold the Function key when
in standby mode.
2. Use the Up and Down buttons to scroll
through the menu and highlight
Push-to-Talk.
3. Press the Select button (or the OK soft
key) to select the option. The next menu
level displays.
4. Use the Up and Down buttons to scroll
through the menu and highlight
Enable/Disable.
5. Press the Select button (or the OK soft
key) to select the option.
6. Use the Up and Down buttons to scroll
through the menu and highlight one of
the following settings (an asterisk
indicates the selected setting):
•PTT Enabled
• PT Disabled — This is the default.
7. Press the Select button (or the OK soft
key) to select the setting.
Up
Push-to-Talk
Enable/Disable