Operation Manual

60
User Option menu
• Press the Up soft key to return to the
previous menu and choose another
option.
• Press the Power Off/End Call key
to exit all menus and return to the
standby state.
Note: You can also press the Exit soft
key from the top-level menu to exit and
return to the active (off-hook) state.
Set up Push-to-Talk
Push-to-Talk mode enables two-way radio communication with another handset user.
You configure push-to-talk using the following:
• Channel — selects the channel to be used.
• Enable/Disable — enable or disable Push-to-Talk.
• Audio Volume — set the audio volume when using Push-to-Talk.
• Tone Volume — set the volume of the tone played for Push-to-Talk.
To set up a Push-to-Talk channel:
1. Press and hold the Function key when
in standby mode.
2. Use the Up and Down buttons to scroll
through the menu and highlight
Push-to-Talk.
3. Press the Select button (or the OK soft
key) to select the option. The next menu
level displays.
4. Use the Up and Down buttons to scroll
through the menu and highlight
Channel.
5. Press the Select button (or the OK soft
key) to select the option.
6. If enabled, select a channel (1 to 8).
Up
Push-to-Talk
Channel