Operation Manual

37
Feature and function activation
The Push-to-Talk session goes out of
pre-empted mode and becomes active
again. If an active Push-to-Talk call has
not ended, the audio is heard again.
To make a telephone call
during a Push-to-Talk call:
1. Press the Power On/Start Call key.
The Push-to-Talk session is pre-empted.
2. After the telephone call is over, press
Power Off/End Call as usual to go back
on-hook.
The Push-to-Talk session goes out of
pre-empted mode and becomes active
again. If an active Push-to-Talk call has
not ended, the audio is heard again.