Datasheet

3
Data networking components
Embedded v.92 Modem
• For Dial Backup or Remote Admin
• V.92 56 kbps ITU standard
• V.34 33.6 kbps ITU standard
• RJ-11 connector
• V.42/MNP 2-4 error control
• V.42/MNP 5 data compression
• Capable of receiving data at 56 kbps and sending data at 31.2 kbps
10/100 Ethernet LAN interface
• 10/100BASE-T Ethernet ports (on board the mainboard)
• Supports IEEE 802.3 Ethernet frame format
• Uses Carrier Sense Multiple Access with Collision Detection
(CSMA/CD)
• 100BASE-TX with RJ-45 connector
• 10/100 Auto-sensing
• Full-duplex support
• PPPoE (enabled using keycode)
WAN interface
Two port PCI card (field installable)
• Each port can be independently configured to Frame Relay or PPP
• STAC compression support
• One serial sync port (V.35) and one T1 port with integrated CSU and
DSU connectivity — N.A. only
• Two serial ports (V.35)
• Two serial ports (V.35 and X.21) – EMEA only
• Frame Relay or PPP Fragmentation
• RTP Header Compression
ISDN via MBMs
• Up to 16 ISDN B-channels
• (PRI or BRI) (optional)
• Dial on demand, Persistent or WAN Backup
• MLPPP
Expansion Cabinet (BCM400 and BCM1000 only)
Connections
• Six Media Bay Module slots
• An 8-pin modular DS256 connector for the interface to the Business
Communications Manager base unit (5 meter cable)
Standard Expansion Cabinet
Depth 18.3 in.; 46.5 cm
Width 17.5 in.; 44.5 cm
Height 5.4 in.; 13.6 cm
Expansion Cabinet with no Media Bay Modules 24.75 lb.; 11.25 kg
Expansion Cabinet with six Media Bay Modules 39 lb.; 17.75 kg
Redundant Expansion Cabinet (redundant power supply and fans)
Depth 20 in.; 53.8 cm
Width 17.6 in.; 44.6 cm
Height 5.4 in.; 13.6 cm
Expansion Cabinet with no Media Bay Modules 31.9 lb.; 14.5 kg
Expansion Cabinet with 6 Media Bay Modules 46.2 lb.; 21 kg
Power requirements
Standard Power Supply Redundant Power Supply
Auto-sensing Auto-sensing
300 Watts 350 Watts
90/264 VAC 90/264 VAC
6.0 A/3.0 A 7.0 A/3.5 A
60/50 Hz 60/50 Hz
Environmental ranges
Operating temperature 32º to 104ºF; 0º to 40ºC
Operating humidity 10% to 90% relative humidity,
non-condensing
Storage temperature -67º to 158ºF; -55º to 70ºC
Storage humidity Up to 95% relative humidity
Mounting options
Rack-mount (standard 19-inch rack); Stand-alone (feet included);
Wall-mount (optional wall-mount bracket available separately)
Telephones and Adapters
Station Sets
Business Series
North Dimensions Loop Length With SAPS
America (Inches) (26G) sets
T7100 8.1D x 7Wx3.5H 1,000 ft. 2,600 ft.
T7208 8.1D x 7.7Wx3.5H 1,000 ft 2,600 ft.
T7316E 8.1D x 10.3Wx3.5H 1,000 ft. 2,600 ft.
T24 KIM 7.7D x 3.6Wx3.4H Connects to T7316E
NACU 12.5 x 12Wx2H 1,000 ft. 2,600 ft.
IP Stations
• Nortel IP Phone 1120E
• Nortel IP Phone 1140E
• Nortel IP Phone 2007
• Nortel IP Phone 2004
• Nortel IP Phone 2002
• Nortel IP Phone 2001
• Nortel IP Phone 2033
• Nortel IP Softphone 2050 (PC or Laptop)
T24 Kim—requires T7316E
T24 EKIM (Enhanced KIM — used as CAP) — max. 12 positions per
system; max 4 EKIMs per position
T24 OKIM (Ordinary KIM — used for answer/DSS/BLF) — unlimited per
system; max 4 OKIMs without power supply per position; max 9
OKIMs with power supply per position
WLAN
• WLAN Handset 2210
• WLAN Handset 2211
• WLAN Handset 2212
• WLAN IP Telephony Manager 2245
• WLAN Applications Gateway 2246
• Nortel Mobile Voice Client 2050
Digital Mobility
• Digital Mobility Controller
• Digital Mobility Basestation
• Digital Mobility Repeater
• Digital Mobility Handsets 7420, 743x, 744x, 413x, 414x
Mobility — Cordless
T7406: 3 handsets per basestation, 2 basestations per system
Accessories
BST Doorphone
Norstar Audio Conferencing Unit (NACU)
Station Auxiliary Power Supply (SAPS)
ATA-2 Analog Terminal Adapter (separate models for NA, Europe
and Australia)