Operation Manual

52
Additional Call Features
2. Dial the Radio Page FFC. You receive
page dial tone.
3. Dial the number of the party you want
to page. After you dial, you receive a
ringback tone.
Note 1: The person you paged uses any
telephone to enter a Radio Page Answer
code, plus their own DN. This action
connects you and the person paged.
Note 2: If your call goes unanswered for a
preset time period, you receive a
continuous high pitched tone then silence.
Press the Goodbye Key.
To use Automatic Post selection: The called party is either busy on the
telephone or away from the desk.
To page the called party there is no
need to redial the number of the called
party.
1. Press the Radio Page Key. You receive
a special dial tone.
2. Dial the Radio Page Access FFC. You
receive dial tone.
Note 1: The person you have paged can
proceed to any telephone, enter their Radio
Page Answer code plus their own DN. This
action connects you and the person paged.
Note 2: You receive a fifteen second, high
pitched tone, then silence if the party paged
does not answer the call within a preset
time period. When you receive this signal,
replace the handset or press the Goodbye
Key.
To use the Special Radio Page
feature:
If you carry a Radio Pager, you receive
a page indication when someone dials
your DN.
RadioPage