Operation Manual

While on an active call

2. Press the Goodbye Key. The caller

remains connected to the attendant.

Note: On the Meridian SL-100, the

Attendant Recall Key is not available; use

the Transfer Key to connect a call to the

attendant.

Use Call Park

Call Park allows a call to be held temporarily and retrieved from any telephone.

You can park an incoming call and page the called party. When you use Call Park

you do not tie up a line. Your network administrator can set up a System Park DN

where most calls are automatically parked.

If configured network wide, Call Park can be used across networks.

To Park a call on the System Park DN

or your own DN:

While on an active call,

press the Park Key.

If there is a System Park DN, the call

automatically parks on the System

Park DN. Otherwise, it parks on your

DN.

Note: On the Meridian SL-100, press the

Park Key and you receive a confirmation

tone. Press the Park again or the

Goodbye Key.

To park a call on a DN other than the

System Park DN or your own DN:

1. Press the Park Key.

2. Dial the DN where you want to park

the call.

3. Press the Park Key.

Note: On Meridian SL-100, press Directed

Call Park (DCPK) Key. Dial the DN where

you want to park the call. Press DCPK

again.

Goodbye

Park