Operation Manual

While on an active call

This section describes features that you can use while on an active call.

Place a call on Hold

Use the Hold feature when you are on the line with one party and a second call

comes in on a second line. You can answer the second call and retain the original

call by putting it on Hold.

To place a call on Hold:

Press the Hold Key. The LCD indicator

flashes beside the line on hold.

Note 1: If the Automatic Hold feature is

configured for your Meridian 1, the active

call is automatically put on Hold when you

answer the second call.

Note 2: On the Meridian SL-100

Automatic Hold is the default feature.

Note 3: The caller hears music while on

hold, if the Music on Hold feature is

configured for your system.

To retrieve a call on hold:

Press the Line (DN) Key beside the

flashing LCD indicator.

Transfer a call

The Transfer feature is used to redirect a call to the appropriate person.

To use the Transfer feature to direct a

call to a third party.

1. On the M3903 and M3904, press the

Transfer Soft Key. The other party is on

hold and you receive dial tone. The

LCD indicator light flashes steadily.

On the M3902, press the fixed

Transfer Key

Hold

2498

Trans

Transfer