Operation Manual

95
M3901 Feature Operation
6. Press the Dial Pad Number Key for the
Transfer feature.
Note: On the Meridian SL-100 use steps
one to three then hang up. If you continue,
a three way conversation is established.
Use Conference Call feature
To add another party to an established call follow these steps:
To use the Conference Call feature:
/
1. Press the Hold Key to put the active
call on hold.
Note: The previous step is not required if
the Automatic Hold feature is active.
/
2. Press the Features Key.
3. Press the Dial Pad Number Key for the
Conference feature.
4. Dial the number of the party you want
to add to the call.
/
5. Press the Features Key.
6. Press the Dial Pad Number Key for the
Conference feature.
Note 1: Repeat these step to add more
parties to the conference (up to six).
Note 2: Press the Goodbye Key, if you
make an error while dialing the number or
if you receive a busy signal.
To return to the original caller:
/
Press the Line (DN) Key.
Hold
Features
Fx
Features
Fx
Line