Datasheet
This capability can be used to strengthen
security with zone-based access controls,
enable new services such as location-
specific content delivery, or as the
foun dation for new applications like
asset tagging, locating and tracking. An
application programming interface makes
the location information accessible for
any business application that can benefit
from user location.
WLAN 2300 Accessories
The WLAN 2300 series supports a range
of antennas for both indoor and outdoor
use. This allows for improved deployment
flexibility where planners can choose
an antenna pattern that meets coverage
requirements while allowing for conve-
nient AP placement and installation.
Customers may use outdoor antennas
for fringe coverage around and between
buildings on an enterprise campus.
This allows customers to extend their
wireless LAN services outdoors, allowing
them to enjoy the benefits of a single
management system for outdoor use in
courtyards, parking lots, the exteriors
of a warehouse for shipping and control
applications. Other applications include
outdoor Internet access, security cameras,
facilities dispatch and environmental
controls. Optional power supplies are
also available.
Optional 802.11n hardware
Trapeze Networks MP-432
(802.11n Access Point)
TheTrapezeNetworksindoorMP-432
is a high-performance 802.11n (3x3)
MultipleInput/MultipleOutput
(MIMO),dualradioaccesspoint,with
maximum aggregate data rates of up to
600Mbps.Oneradiooperatesinthe
2.4GHzbandandoneinthe5GHz
band.TheMP-432isbackwardscompat-
ible with legacy 802.11 a/b/g clients
inthe2.4GHzand5GHzbandsto
provide investment protection without the
need for a second overlay networks. It is
compliantwiththeIEE802.11nDraft2.0
standard. In most deployment scenarios,
theMP-432operatesinfullfunctionality
3x3MIMOdualradiomodewiththe
existingIEEE802.3af.TheMP-432is
compatible with the Nortel WLAN 23xx
Security Switches.
Key features include:
•Highest possible performance
•Simultaneousdualbandoperation
(2.4GHzand5GHz)
•300Mbpsperbandupto
600Mbpstotal
•3x3MIMOinbothbands
•Adaptiveframeaggregation
•2GigabitEthernetuplinkports
•ProtectsexistingWi-Fiinvestment
•RunsonexistingWLAN23xxsecurity
switches
•Workswithexistingoremergingpower
standards (802.3af, 802.3at)
•Fitsexistingmountingbrackets
•Wi-Ficertiedready
•Fullycompliantwith802.11n
Draft 2.0
•Wi-Ficertiable
•Ensuredinteroperabilitywith
standards-based network
Trapeze Networks MX-2800
(High Capacity Controller)
TheTrapezeMobilityExchangeMX-2800
is the next-generation WLAN controller
for medium to large-size enterprise
WLAN deployments. It offers 28 Gbps
of throughput and supports up to 512
802.11n APs, while providing always-on
availability and hitless failover with no
service interruption.
Key features include:
•28GbpsEthernetswitchingcapacity
•210-Gbpsports;81-Gbpsports
•Line-ratespeedandthroughput
•Industry’sonlyhardware-switchedwired
and wireless
•512activeAP’s(Note:max256AP
withsoftwareversion7.0;max512AP
with software version 7.2 or later)
•12,000activeclientsperswitch
Why you should choose
Nortel’s WLAN 2300 Series
Built to support voice and
multimedia applications in
today’s networks
The WLAN 2300 Series is designed for
voice, multimedia and business-critical
applications;itadherestothelatestQoS
standards and minimizes the perfor-
mance impact of today’s strong security
standards by offloading back-end AAA
servers of many cryptographic processing
functions. This architecture allows fast
secure roaming among all access points
with the minimal latency and jitter
needed to support time-sensitive applica-
tions. Dynamic RF management ensures
service resiliency by protecting against
unexpected interference, obstructions,
outages and weak coverage zones that can
have a significant impact on performance
and user experience. The system can also
be deployed with full redundancy of all
network components to protect against
service interruption.
11
Trapeze
Networks
MP-432
Trapeze Networks MX-2800










