User's Manual

71
BCM 4.0 Device Configuration Guide
Chapter 8
Global telephony settings
There are a number of settings that define telephony operation for the entire system. These have
been gathered on one panel, separated into sections.
The following paths indicate where to access global telephony settings in Element Manager and
through Telset Administration:
• Element Manager: Configuration > Telephony > Global Settings > Feature Settings
• Telset interface: **CONFIG > System Prgrming
Click one of the following links to connect with the type of information you want to view:
Panels and Details Panels Configure Features
“Feature Settings” on page 72
“Programming Business name display
(outgoing)” in the BCM 4.0 Networking
Configuration Guide (N0060606)
“Feature Settings panel” on page 73 “Selecting the music source” on page 282
“Call Park” on page 206
“Directed Pickup” on page 194
“Holding calls” on page 200
“Transfer (unanswered) calls” on page 202
“Paging” on page 215
“Receiver volume” on page 189
“Answer DNs” on page 196
“Timers” on page 76 “Camp-on” on page 205
“External call codes” on page 223
“Call Park” on page 206
“Callback” on page 207
“Configuring an analog telephone” on page 116
“Advanced Feature Settings” on page 78
“Sharing calls by parking on SWCA buttons” on
page 207
“ONN Blocking (North American systems)” on
page 80
“Blocking outgoing name display at the
telephone” in the BCM 4.0 Networking
Configuration Guide (N0060606)
“Silent Monitor” on page 81 “Capabilities and Preferences - Capabilities tab”
on page 52 (Supervisor sets)
“Monitoring external hunt group calls” on
page 107
“Reset logs” on page 82 “Capabilities and Preferences main tab” on
page 50 (Set log space)
“Call log” on page 210
Click the navigation tree heading to access general information about user management.