User's Manual

60 Chapter 6 DN records parameters
N0060600N0060600
Table 16 describes the possible settings for telephone buttons.
Table 16 Button programming fields (Sheet 1 of 2)
Setting Values Description
Model 7100
7208
7310/7316
7316E
7324
2004/2050
2001
2002
2007
2033
DMC prtb
1120E, 1140E
2210
2211
2212
If you have not yet connected a telephone, choose the model
of the telephone. This creates a number of defaults based on
the telephone capabilities.
This setting reflects whatever you set on the main table.
This field is read-only if the telephone is already attached or
registered to the system.
• 7310 also refers to the cordless 7406 cordless digital
phones.
• 7316E indicates both a stand-alone 7316E digital phone
and a 7316E digital phone connected to one or more Key
Indicator Modules (KIMs)
• 2002, 2004, IP phones connect to the Key Expansion
Module (KEM)
ISDN These telephones have their own set of DN records.
• ISDN refers to any ISDN equipment
Other This heading is used for the following types of devices:
• analog telephones
• Intl set (European only) is used for other types of
compatible telephones used in specific non-North
American markets, such as the 7000 digital phone.
Button Number (1-24) <1-XX> Use the telephone buttons to choose the features you want to
program.
Blank means that nothing is programmed on the button.
Example: New KIM modules have all blank buttons when they
are first installed.
Function Blank
Feature
Internal autodial
External autodial
Choose the type of feature that you want to program on the
telephone buttons.
Blank means that nothing is programmed on the button.
Example: New KIM modules have all blank buttons when they
are first installed.
Value
Feature <feature code> Use the arrow to choose the feature you want to program on
the button.
Internal autodial <Internal DN> Enter the DN number for the internal telephone you want the
telephone to dial by pressing this button.
Digits
Feature <feature digits> Includes digits for such features as system speed dial codes.
External autodial <dialing codes plus dialout
string>
Enter the complete dial sequence for the external call. This
sequence depends on what you chose for the route in the
Value field.