User's Manual

52 Chapter 6 DN records parameters
N0060600N0060600
Capabilities and Preferences - Capabilities tab
Capabilities settings control how the system interacts with individual telephones, and how the
telephones receive calls.
First Display Name
Number
Line
Determine the call display information that appears first.
This feature depends on the services to which you subscribe. Call Display
information can contain the name of the caller, the number of the caller,
the name of the line in your BCM where the call enters. For each
telephone, you can determine the call display information that appears
first.
See also “Programming incoming CLID” in the BCM 4.0 Networking
Configuration Guide (N0060606).
Tips: The Call Information feature displays and toggles between the name and line number for
Call Display information.
Alpha tagging: If you are using the alpha tagging feature, choose Name. Refer to “Using alpha
tagging for name display (incoming)” in the BCM 4.0 Networking Configuration Guide (N0060606).
Auto Called ID <check box> Select whether you want to see on your display the extension number
and name of the telephone you call.
The Auto Called ID set for target lines is the same telephone that has an
appearance on that target line.
Note: Not all the fields shown below necessarily appear for any one
type of telephone. Some fields relate to specific models of telephones.
Table 13 Capabilities and Preferences tabbed panel (Sheet 2 of 2)
Attribute Values Description