User's Manual

Chapter 6 DN records parameters 43
BCM 4.0 Device Configuration Guide
Figure 7 Main Panel tabs
Table 8 Common columns for the main panels (Sheet 1 of 2)
Attribute Value Description
DN <numeric> This number is unique to each telephone record. The number
identifies the telephone to the system. DN start digits and DN length
are configured during system setup.
Digital and analog telephone DNs map one-to-one with ports on
module connections. IP telephone DNs do not map to specific ports;
however, a keycode is required to activate the feature.
Model Analog
7000
7100
7208
7310/7316
7316E
7324
2004/2050
2002
2001
2007
2033
2050
DMC prtb
1120E, 1140E
Other
This heading appears for telephones in the digital DN range, from
the Start DN (default: 221) up to DN 433. Choose the setting that is
appropriate for the telephone you want to configure.
This field is read-only if the telephone is already attached or
registered to the system.
• 7310/7316: also 7406 cordless digital phone
• 7316E: also for 7316E digital phone with KIMs
(Model 7000 phones are supported in Europe only)
Name <up to seven alphanumeric
characters>
Use this field to provide a more specific description of the telephone,
such as the last name of the user, the location, or the actual
extension number if it is different than the DN number.
Also refer to “Programming name display (outgoing)” in the BCM 4.0
Networking Configuration Guide (N0060606).