User's Manual

238 Chapter 27 Display prompts and messages
N0060600N0060600
Invalid location
Move button: You tried to move a line to a button that cannot be a line button, such
as an intercom button, Handsfree/Mute button, or an answer button.
Invalid number
You entered an invalid line pool code or an invalid destination code.
Auto dial: You are programming an internal autodial button and have entered a
number that is not an internal number on your system. Enter a valid internal number.
If the number you are entering is a destination code, use external autodial.
Call park: You have entered an invalid retrieval code.
Invalid number
CANCL RETRY
Transfer: You entered an invalid internal number. Press RETRY and enter the
number again. On 7000 or 7100 digital phones, use the FEATURE #70 feature code
to cancel the call, and then retry.
Invalid number
Observe
Silent monitor: The DN you entered is invalid for your system. Press Observe to
enter another hunt group telephone.
Invalid zone
Page: You have entered a page zone code that is not between 0 and 6.
LineXXX 01:45
Call duration timer: You parked your last call. You cannot see the length of time a call
was parked.
LineXXX>YYY
You are receiving an external call forwarded from extension YYY, or you have an
answer button for extension YYY and an external call is ringing on that telephone.
LineXXX>YYY
CANCLRETRYJOIN
Transfer: Press JOIN to transfer the call on line XXX to telephone YYY. Press
RETRY if, after talking to the person at extension YYY, you decide to transfer the call
to another person.
LineXXX NNN
TRANSFR
Conference call: You are on a conference with the two lines or telephones shown.
You can drop out of the conference, and leave the other two parties connected
(Unsupervised Conference) by pressing
TRANSFR or entering the Transfer feature
code.
LineXXX
TRANSFR
You are connected to an external call. Press TRANSFR to transfer the call. Enter the
digits of the number you want to dial.
LineXXX callback
CALLBCK
Prime telephone: A person camped, parked, or transferred a call on line XXX, but no
one has answered the call. Press
CALLBCK or the line button to connect to the call.
Line XXX hung up
Transfer: The external caller you were transferring hung up before the transfer was
complete.
Camp-on: A call you camped has returned to you, but the caller hung up before you
can reconnect.
LXXX:LINENAMVMsg
NEXT CALL CLEAR
Message: You are viewing your message list. The display shows the number and
name of the line used for your message.
LineXXX>LineYYY
Prime telephone: The call coming in on line XXX for target line YYY has come to you
because Line YYY is busy.
LineXXX to prime
Prime telephone: There is no telephone that can receive a call on line XXX, so the
system has transferred it to you.
LineXXX transfer
Another user in the system is transferring a call to you on line XXX.
LineXXX waiting
A camped call is waiting. Press the line button, or use Call Queuing to answer the
call. Press
HOLD if you have 7000 and 7100 digital phones.
Display prompt Description of error or action