User's Manual

233
BCM 4.0 Device Configuration Guide
Chapter 27
Display prompts and messages
Use the following information for an explanation of the prompts you see on your telephone. The
following tables show the prompt along with a description or required action, as appropriate.
Prompts are listed alphabetically within the following categories:
• Common display prompts
• “Viewing active services” on page 244
• “Call log prompts” on page 245
Common display prompts
These prompts can appear during general call features:
Display prompt Description of error or action
Key: NNN = DNs#; SSS =
second DN#; XXX = line
number; YYY = second line
number
Double SS symbols indicate a long distance call. (May be available with Call
Display services.)
01:9___
CANCL BKSP OK
Speed dial: Continue entering the number you want to program. You can
change the number by pressing BKSP
or the volume bar. When you are
finished, press
HOLD or OK.
3 parties only Conference call: You are trying to add a fourth party to your conference call,
or to join two conferences together.
Release one call from the conference before adding another, or keep the
two conferences separate.
4 calls The conference master presses one of the keys representing the three-party
conference slaves. The total number of conferees is displayed transiently for
three seconds.
NNN 02:47 Call duration timer: The display shows the last call you made, or the total
elapsed time in minutes and seconds on a current call.
XXX <LINENAME>
SHOW OK
Button inquiry: The display shows the number and name of the line. Press
SHOW
to view the redirection status of the line.
NNN: Busy
NEXT VIEW
Hunt group: The hunt group member is in a conference, and the supervisor
cannot break in. The display briefly shows Conference busy, and then
reverts to this prompt.
NNN: Idle
NEXT VIEW
Hunt group: The hunt group member currently is not handling a call.