User's Manual

Chapter 23 Telephony features 189
BCM 4.0 Device Configuration Guide
• At the telephone:
— FEATURE *501 to select Primary Language for the telephone display.
— FEATURE *502 to select Alternate Language for the telephone display.
— FEATURE *503 to select Alternate Language 2 for the telephone display.
— FEATURE *504 to select Alternate Language 3 for the telephone display. (Not available
in all country profiles.)
Moving line buttons
Change the position of your line or hunt group line buttons.
To move line buttons
1 Press FEATURE *81.
2 Press the line button that you want to move.
3 Press the button to which you want to move the line.
4 Press RLS.
The two buttons are exchanged.
5 Update the button label strip on your telephone.
You can block the user from using these feature keys by setting the set lock for the telephone to
Partial or Full (Configuration > Telephony > Sets > Active Sets > Restrictions tab).
Receiver volume
• Using the system (determine if the handset or headset volume returns to a volume level set by
the system, or to the volume set by the user):
Configuration > Telephony > Global Settings > Feature Settings > Receiver volume
• At the telephone:
Use the rocker switch under the dialpad to change the sound levels heard through your
handset. This also changes the volume levels during handsfree calls.
Programming note: Handsfree speaker volume returns to the default value set at the telephone,
after each call ends.
Note: Line buttons cannot be exchanged with intercom, Answer DN, or
Handsfree buttons.