User's Manual

Chapter 14 Configuring Hunt Groups 105
BCM 4.0 Device Configuration Guide
Line Assignment
Lines <line #> These are the lines/target lines that are assigned to the hunt
group. Ensure that they also are not assigned to any of the
member telephones.
Action
Add Multiple lines can be assigned to Hunt groups. However, a line can only exist in one Hunt group.
Programming note: Lines assigned to line buttons on individual telephones take precedence
over the lines assigned to Hunt group buttons. Therefore, Nortel recommends that you do not
assign lines to individual telephone DN records for telephones that are part of a Hunt group.
1. On the Hunt Groups Members subpanel, select the hunt group where you want to add lines.
2. In the Line Assignment subpanel in the lower frame, click Add.
3. Enter line numbers.
4. Click OK.
Delete 1. On the Hunt Groups Members subpanel, select the hunt group where you want to delete
lines.
2. In the Line Assignment subpanel in the lower frame, click Delete.
3. Click Yes.
Table 35 Hunt Group tables (Sheet 2 of 2)
Field Values Description