Network Router User Manual

Web OS 10.0 Application Guide
466
Chapter 17: Bandwidth Management
212777-A, February 2002
2. Allocate bandwidth for each string.
To do this, assign a BWM contract to each defined string.
3. Configure a real server to handle the cookie.
To add a defined string:
where URL path ID is the identification number of the defined string.
Example:
4. Either enable DAM on the switch or configure a proxy IP address on the client port.
NOTE – If VMA is enabled, you need to configure a unique proxy IP address for each port 1-8.
To turn on DAM:
To turn off DAM and configure a Proxy IP address on the client port:
NOTE – By enabling DAM on the switch or, alternatively, disabling DAM and configuring a
Proxy IP address on the client port, port mapping for URL-based load balancing can be per-
formed.
5. Enable SLB.
>> # /cfg/slb/layer7/lb/cont <URL path ID> <BWM Contract number>
>> # /cfg/slb/real 2/layer7/addlb <URL path ID>
>> # /cfg/slb/real 2/layer7/addlb 3
>> # /cfg/slb/adv/direct ena
>> # /cfg/slb/adv/direct dis
>> # ../port 2/pip 12.12.12.12
>> # proxy ena
>> # /cfg/slb/on