Network Router User Manual

Web OS 10.0 Application Guide
378
Chapter 15: Content Intelligent Switching
212777-A, February 2002
3. Apply and save your configuration changes.
4. Identify the defined string IDs.
For easy configuration and identification, each defined string has an ID attached, as shown in
the following example:
Number of entries: six
5. Configure one or more real servers to support URL-based load balancing.
6. Add the defined string(s) to the real server using the following command:
where ID is the identification number of the defined string.
NOTE – If you don’t add a defined string (or add the defined string “any”) the server will han-
dle any request.
A server can have multiple defined strings. For example:
n “/images”
n “/sales”
n “.gif”
With these defined strings, this particular server can handle requests that start with “/images”
or “/sales” and any requests that contain “.gif”.
>> # /cfg/slb/layer7/slb/cur
ID SLB String
1 any
2 .gif
3 /sales
4 /xitami
5 /manual
6 .jpg
>> # /cfg/slb/real 2/layer7/addlb <ID>