Network Router User Manual

Web OS 10.0 Application Guide
358
Chapter 14: Virtual Private Network Load Balancing
212777-A, February 2002
One static route is required for each VPN device being load balanced.
6. Configure VRRP for virtual routers 1 and 2.
>> # /cfg/ip/route
>> IP Static Route# add 10.0.0.10 (Static route destination IP address)
>> IP Static Route# 255.255.255.255 (Destination subnet mask)
>> IP Static Route# 20.0.0.101 (Enter gateway IP address)
>> IP Static Route# 2 (For interface 2)
>> IP Static Route# add 10.0.0.11 (Enter destination IP address)
>> IP Static Route# 255.255.255.255 (Destination subnet mask)
>> IP Static Route# 20.0.0.102 (Enter gateway IP address)
>> IP Static Route# 3 (For interface 3)
>> IP Static Route# add 10.0.0.20 (Enter destination IP address)
>> IP Static Route# 255.255.255.255 (Destination subnet mask)
>> IP Static Route# 20.0.0.101 (Enter gateway IP address)
>> IP Static Route# 2 (For interface 2)
>> IP Static Route# add 10.0.0.21 (Static route destination IP address)
>> IP Static Route# 255.255.255.255 (Destination subnet mask)
>> IP Static Route# 20.0.0.102 (Enter gateway IP address)
>> IP Static Route# 3 (For interface 3)
>> # /cfg/vrrp/on (Enable VRRP)
>> Virtual Router Redundancy Protocol# vr 1 (Select virtual router 1 menu)
>> VRRP Virtual Router 1# ena (Enable the virtual router)
>> VRRP Virtual Router 1# vrid 1 (Assign virtual router ID 1)
>> VRRP Virtual Router 1# if 1 (To interface number 1)
>> VRRP Virtual Router 1# prio 101 (Set the renter priority)
>> VRRP Virtual Router 1# addr 30.0.0.50 (Set IP address of virtual router)
>> VRRP Virtual Router 1# share dis (Disable sharing)
>> VRRP Virtual Router 1# track (Select virtual router tracking menu)
>> VRRP VR 1 Priority Tracking# vrs ena (Enable tracking of virtual routers)
>> VRRP VR 1 Priority Tracking# apply (Apply the configuration)
>> VRRP VR 1 Priority Tracking# save (Save the configuration)
>> VRRP VR 1 Priority Tracking# ../vr 2 (Select virtual router 2 menu)
>> VRRP Virtual Router 2# ena (Enable the virtual router)
>> VRRP Virtual Router 2# vrid 2 (Assign virtual router ID 2)
>> VRRP Virtual Router 2# if 2 (To interface number 2)
>> VRRP Virtual Router 2# prio 101 (Set the renter priority)
>> VRRP Virtual Router 2# addr 20.0.0.1 (Set IP address of virtual router)
>> VRRP Virtual Router 2# share dis (Disable sharing)
>> VRRP Virtual Router 2# track (Select Virtual Router Tracking Menu)
>> VRRP VR 2 Priority Tracking# ports ena (Track VLAN switch ports)
>> VRRP VR 2 Priority Tracking# apply (Apply the configuration)
>> VRRP VR 2 Priority Tracking# save (Save the configuration)