Network Cables User Manual

206379-A
3-1
Chapter 3
Software Installation
This chapter provides instructions for installing the Windows- and Novell
NetWare-based BayStack 21 network driver software and configuring the
BayStack 21 PCI 10/100 Adapter w/WOL on your network. This chapter
describes procedures for Windows 95, Windows 98, Windows NT, and Novell
NetWare 4.x. Drivers for other operating systems are available but not discussed in
this guide. You can access information for installing other drivers from the
BayStack 21 PCI 10/100 Adapter w/WOL Software & Documentation CD.
Different versions of Windows may have different installation screens than those
shown in these instructions. Your installation screens may appear in a different
order than the screens in this chapter, or you may encounter more or fewer
screens. You will be prompted for the same information, regardless of the
Windows version.
The driver starts automatically for Windows 95 and Windows 98. Nortel Networks
recommends using the automatic process to take advantage of this
“plug-and-play” capability. The driver must be manually configured for
Windows NT.