User's Manual

NN10364-301 MCS 5100 3.5 Standard 6.0 December 2006
26
Copyright © 2006 Nortel Networks
Hardware required for the 2-server system consists of the following:
• terminal server: 1 MRV LX-4008-101AC including
— Linux-based secure console standalone unit with 8 RS232 RJ45
ports
— internal V.90 modem and AC power
— software and documentation on CD-ROM
• core servers: 2 Sun Fire V100 servers including
— 1 550-MHz UltraSPARC IIi Processor with 512-KB On-Chip L2
Cache
— 1-GB Memory
— 2 40-GB 7200 RPM IDE Disk (second disk for mirroring)
—CD-ROM
— 2 10/100-Mbit Ethernet and USB Ports
— System configuration card
— Solaris* 8 and LOMlite2 pre-installed
— two (2), cat-5 Ethernet cables for each V100 server (for a total of
four (4) ethernet cables)
Note: Each V100 server uses two (2) ethernet cables to
connect the V100 servers to the layer-2 switch.
— two (2) serial (RS232) cables for each V100 server (or a total of
eight (8) serial cables.)
Note: Serial cables are ordered with the MRV LX terminal
server.
– one (1) cable for Serial Port A (LOM)
– one (1) cable for Serial Port B
— Sun Fire V100 server documentation