User's Manual

NN10364-301 MCS 5100 3.5 Standard 6.0 December 2006
140
Copyright © 2006 Nortel Networks
Procedure 40 Configuring the Oracle Monitor tabs
At the System Management Console,
1 Use the values from the table that follows to complete the Oracle
Server tab parameters.
The shaded rows indicate values that must be addressed by the
installer.
2 Use the values from the table that follows to complete the IMS
Main Database tab parameters.
ATTENTION
Do not click Apply until you have finished configuring the
component.
Table 36 Oracle Server tab
Parameter Recommended value Notes Example
SNMP request port 9161 default
SNMP agent IP address <either the word
"localhost" or the
machine logical IP
address of the database
server that this Oracle
Monitor is running on>
192.168.14.31
120.120.13.22
Oracle Server name imsdb1 default
Active checked default
Monitor functions:
Handler name
GeneralInfo default
Monitor functions:
Polling interval (min)
1 default
Active checked default
Monitor functions:
Handler name
OperationalStatus default
Monitor functions:
Polling interval (min)
1 default
Active checked default