Return to Menu ••••••••••••••••••••••••••••••••• Norstar ICS Hospitality Features Card ••••••••••••••••••••••••
Hospitality features This card shows the Business Series Terminals buttons. The table below shows which buttons to use on the different types of Nortel Networks telephones. Button Name T7100, T7208, T7316 M7100, M7208, M7310, M7324 Feature ≤ Ä Hold ≥ ú Volume Control √ Ã Release ® ¨ Hospitality Services (HS) is a group of features that increases the value of the system in small to medium sized facilities such as hotels, motels or hospitals.
Alarm time ≤°‡fi Cancel ≤£°‡fi The Alarm time feature provides an alarm clock capability on system set and analog telephones connected to anATA or an ASM. Both room sets and common sets can be programmed to sound an audible alert at a requested time. One Alarm time within a 24 hour period is programmable on a room or common set and must be reset daily. When the alarm sounds, all sets in a given room alert. Canceling the alarm on any set cancels the alarm on all the sets in the room.
Alarm time: HS admin set ≤°‡‡ Only an HS admin set can use the Hospitality Services admin alarm feature. The HS admin alarm feature is room oriented only, it does not control the alarms on common sets.
Room condition: Room set To update the Room condition using a room set: 1. Press ≤°‡fl on a system telephone or press û¥¡àß on an analog telephone. 2. At the prompt, enter the status of the room. 3. Press ⁄ on the dial pad to indicate Set to srv done. If required, enter the Room condition password. or, Press ¤ on the dial pad to indicate Set to needs srv. If required, enter the Room condition password. 4. The display shows Set to srv done or Set to needs srv.
Meridian and Norstar are trademarks of Nortel Networks. Meridian Norstar is manufactured by Nortel Networks.
