User guide

66 Chapter 5 Handling calls
P0937240 03.1
Cancel a transfer
You can reconnect to the person you are trying to transfer before the transfer is complete.
1 Press ≤£‡‚ or CANCL
.
2 If you do not reconnect to your original call, press ® and then press the held line.
Transfer prompts
System telephones with two-line displays can show any of the following prompts:
You are talking to the person you want to transfer the call to. Press
RETRY
if you decide to transfer the call to another person. Press ®
or JOIN
to transfer the call.
The person to whom you tried to transfer a call did not answer. Press
CALLBCK
or the flashing line button to reconnect to the call.
On the T7100 telephone, lift the handset to reconnect to the call.
On a NetVision telephone, press
The person to whom you tried to transfer a call has Do Not Disturb
active on their telephone. Press JOIN
to transfer the call. Press RETRY
to transfer the call to another person. Press CANCL
or the flashing line
button to reconnect to the call.
On the T7100 or NetVision telephone, use the £‡‚ feature code
to cancel the call.
You entered an invalid internal number. Press RETRY
and enter the
number again.
On the T7100 or NetVision telephone, use the £‡‚ feature code
to cancel the call, and then retry.
The external caller you were transferring hung up before the transfer
was complete.
Press JOIN
to transfer the call on line 061 to telephone 221. Press
RETRY
if, after talking to the person at extension 221, you decide to
transfer the call to another person.
The telephone to which you are trying to transfer a call is out of
service.
You cannot transfer the call because of telephone or line restrictions.
Complete the transfer in progress before you access a new feature,
answer another call or select an outgoing line.
221>222
CANCL RETRY JOIN
221 no reply
CALLBCK
SND
SND
Do not disturb
CANCL RETRY JOIN
Invalid number
CANCL RETRY
Line061 hung up
Line061>221
CANCL RETRY JOIN
Not in service
CANCL RETRY
Restricted call
CANCL RETRY
Still in trnsfer
CANCL RETRY