User's Manual

Modem Access 73
CallPilot Mini/CallPilot 150 Installation and Maintenance Guide
3 In the Advanced options box, select the Log on to network option:
4 In the Advanced options box, clear the following options:
Enable software compression
Require encrypted password
Require data encryption
Record a log file for this connection
5 In the Allowed network protocols box, select the TCP/IP option.
6 In the Allowed network protocols box, clear the following options:
NetBEUI
IPX/SPC Compatible
7 Click the TCP/IP Settings button.
8 Select the Specify an IP address option.
9 In the IP address box, enter the IP address of CallPilot system, but change the last set of digits
to a different number.
For example, if the CallPilot IP address is 192.168.0.1, enter 192.168.0.10.
10 Clear the following options:
Use IP header compression
Use default gateway on remote network
11 Click the OK button.
12 Click the OK button.
Creating a Dial-Up Networking connection on Windows NT 4.0
1 Click the Start button and then click Programs.
2 Click Accessories and then click Dial-Up Networking.
The Dial-Up Networking dialog box appears.
3 Click the More button and then click Operator assisted or manual dialing.
4 Click the New button.
5 Enter a name for the CallPilot connection.
6 Select the I know all about dial up connections and would prefer to edit the properties
directly option.
The Edit Phonebook Entry dialog box appears.
7 Refer to “Configuring the Dial-Up Networking TCP/IP parameters on Windows NT 4.0” for
information about this dialog box.
Note: The IP address you enter here is used to identify your computer during the
modem connection. It does not affect the LAN configuration of your computer.