User's Manual
Table Of Contents
- Contents
- Preface
- The Command Line Interface
- First-Time Configuration
- Using the Setup Utility
- Setting Passwords
- Menu Basics
- The Information Menu
- Information Menu
- System Information
- Layer 2 Information
- Layer 3 Information
- IP Routing Information
- ARP Information
- BGP Information
- BGP Peer information
- BGP Summary information
- OSPF Information
- Routing Information Protocol Information
- IP Information
- IGMP Multicast Group Information
- IGMP Group Information
- IGMP Multicast Router Port Information
- IGMP Mrouter Information
- VRRP Information
- Quality of Service Information
- 802.1p Information
- Access Control List Information
- Link Status Information
- Port Information
- Logical Port to GEA Port Mapping
- Fiber Port SFP Status
- Information Dump
- The Statistics Menu
- The Configuration Menu
- Configuration Menu
- Viewing, Applying, and Saving Changes
- System Configuration
- Port Configuration
- Layer 2 Configuration
- 802.1x Configuration
- Rapid Spanning Tree Protocol/ Multiple Spanning Tree Protocol Configuration
- Common Internal Spanning Tree Configuration
- Spanning Tree Configuration
- GVRP Configuration
- GVRP Port Configuration
- Trunk Configuration
- IP Trunk Hash Configuration
- LACP Configuration
- Layer 2 Failover Configuration
- VLAN Configuration
- Protocol-based VLAN Configuration
- Private VLAN Configuration
- Layer 3 Configuration
- IP Interface Configuration
- Default Gateway Configuration
- IP Static Route Configuration
- IP Multicast Route Configuration
- ARP Configuration
- IP Forwarding Configuration
- Network Filter Configuration
- Routing Map Configuration
- Routing Information Protocol Configuration
- Open Shortest Path First Configuration
- Border Gateway Protocol Configuration
- IGMP Configuration
- Domain Name System Configuration
- Bootstrap Protocol Relay Configuration
- VRRP Configuration
- Quality of Service Configuration
- Access Control List Configuration
- Port Mirroring Configuration
- Setup
- Dump
- Saving the Active Switch Configuration
- Restoring the Active Switch Configuration
- The Operations Menu
- The Boot Options Menu
- The Maintenance Menu
- Alteon OS Syslog Messages
- Alteon OS SNMP Agent
- Glossary
- Index
Alteon OS Command Reference
Alteon OS Syslog Messages
35943W7774, May 2007
LOG_ERROR (continued)
VRRP Synchronization Receive UNKNOWN Timeout
VRRP Sync receive in progress ... cannot start Sync
VRRP Sync already in progress ... cannot start Sync
VRRP Config Sync route find error.
VRRP Config Sync tcp_open error.
VRRP Config Synchronization Timeout - Resuming Console thread
VRRP New configuration did not validate (rc=<code>)
VRRP New configuration did not apply (rc=<code>)
VRRP Sync config apply error.
VRRP Attempting to redirect a previously redirected input
VRRP Sync rx tcp open Error
VRRP Sync Version/Password Failed-No Version/Password Line
VRRP Sync Version Failed - peer:<host> config:<version>
VRRP Sync Password Failed-Bad Password
VRRP Sync of switches of different hardware types is not supported
VRRP Synchronization connection RCLOSE before RX.
VRRP Sync transmit already in progress ... cannot start Sync
VRRP Sync receive in progress ... cannot start Sync
VRRP Sync receive already in progress ... cannot start Sync receive
VRRP Sync transmit in progress ... cannot start Sync receive