User's Manual
Table Of Contents
- Contents
- Preface
- The Command Line Interface
- First-Time Configuration
- Using the Setup Utility
- Setting Passwords
- Menu Basics
- The Information Menu
- Information Menu
- System Information
- Layer 2 Information
- Layer 3 Information
- IP Routing Information
- ARP Information
- BGP Information
- BGP Peer information
- BGP Summary information
- OSPF Information
- Routing Information Protocol Information
- IP Information
- IGMP Multicast Group Information
- IGMP Group Information
- IGMP Multicast Router Port Information
- IGMP Mrouter Information
- VRRP Information
- Quality of Service Information
- 802.1p Information
- Access Control List Information
- Link Status Information
- Port Information
- Logical Port to GEA Port Mapping
- Fiber Port SFP Status
- Information Dump
- The Statistics Menu
- The Configuration Menu
- Configuration Menu
- Viewing, Applying, and Saving Changes
- System Configuration
- Port Configuration
- Layer 2 Configuration
- 802.1x Configuration
- Rapid Spanning Tree Protocol/ Multiple Spanning Tree Protocol Configuration
- Common Internal Spanning Tree Configuration
- Spanning Tree Configuration
- GVRP Configuration
- GVRP Port Configuration
- Trunk Configuration
- IP Trunk Hash Configuration
- LACP Configuration
- Layer 2 Failover Configuration
- VLAN Configuration
- Protocol-based VLAN Configuration
- Private VLAN Configuration
- Layer 3 Configuration
- IP Interface Configuration
- Default Gateway Configuration
- IP Static Route Configuration
- IP Multicast Route Configuration
- ARP Configuration
- IP Forwarding Configuration
- Network Filter Configuration
- Routing Map Configuration
- Routing Information Protocol Configuration
- Open Shortest Path First Configuration
- Border Gateway Protocol Configuration
- IGMP Configuration
- Domain Name System Configuration
- Bootstrap Protocol Relay Configuration
- VRRP Configuration
- Quality of Service Configuration
- Access Control List Configuration
- Port Mirroring Configuration
- Setup
- Dump
- Saving the Active Switch Configuration
- Restoring the Active Switch Configuration
- The Operations Menu
- The Boot Options Menu
- The Maintenance Menu
- Alteon OS Syslog Messages
- Alteon OS SNMP Agent
- Glossary
- Index
Alteon OS Command Reference
358
Alteon OS Syslog Messages 43W7774, May 2007
LOG_ERROR (continued)
CLI A previous apply is being executed. Try later.
CLI RADIUS secret must be 1-<len> characters long
CLI Please configure primary RADIUS server address.
CLI TACACS+ secret must be 1-<len> characters long
CLI Please configure primary TACACS+ server address.
CLI Port Mirroring changes are not applied
VRRP cfg_sync_tx_putsn: ABORTED
VRRP Synchronization RX connection RESET.
VRRP Synchronization RX connection TIMEOUT.
VRRP Synchronization RX connection UNKNOWN CLOSE.
VRRP Synchronization RX connection UNREACHABLE.
VRRP Synchronization TX Error.
VRRP Synchronization TX connection RESET.
VRRP Synchronization TX connection TIMEOUT.
VRRP Synchronization TX connection UNREACHABLE.
VRRP Synchronization TX connection UNKNOWN CLOSE.
VRRP Synchronization connection RCLOSE by peer.
VRRP Synchronization connection Wait-For-Close Timeout.
VRRP Synchronization connection Transmit Timeout.
VRRP Synchronization Receive Timeout