User's Manual
Table Of Contents
- Contents
- Preface
- The Command Line Interface
- First-Time Configuration
- Using the Setup Utility
- Setting Passwords
- Menu Basics
- The Information Menu
- Information Menu
- System Information
- Layer 2 Information
- Layer 3 Information
- IP Routing Information
- ARP Information
- BGP Information
- BGP Peer information
- BGP Summary information
- OSPF Information
- Routing Information Protocol Information
- IP Information
- IGMP Multicast Group Information
- IGMP Group Information
- IGMP Multicast Router Port Information
- IGMP Mrouter Information
- VRRP Information
- Quality of Service Information
- 802.1p Information
- Access Control List Information
- Link Status Information
- Port Information
- Logical Port to GEA Port Mapping
- Fiber Port SFP Status
- Information Dump
- The Statistics Menu
- The Configuration Menu
- Configuration Menu
- Viewing, Applying, and Saving Changes
- System Configuration
- Port Configuration
- Layer 2 Configuration
- 802.1x Configuration
- Rapid Spanning Tree Protocol/ Multiple Spanning Tree Protocol Configuration
- Common Internal Spanning Tree Configuration
- Spanning Tree Configuration
- GVRP Configuration
- GVRP Port Configuration
- Trunk Configuration
- IP Trunk Hash Configuration
- LACP Configuration
- Layer 2 Failover Configuration
- VLAN Configuration
- Protocol-based VLAN Configuration
- Private VLAN Configuration
- Layer 3 Configuration
- IP Interface Configuration
- Default Gateway Configuration
- IP Static Route Configuration
- IP Multicast Route Configuration
- ARP Configuration
- IP Forwarding Configuration
- Network Filter Configuration
- Routing Map Configuration
- Routing Information Protocol Configuration
- Open Shortest Path First Configuration
- Border Gateway Protocol Configuration
- IGMP Configuration
- Domain Name System Configuration
- Bootstrap Protocol Relay Configuration
- VRRP Configuration
- Quality of Service Configuration
- Access Control List Configuration
- Port Mirroring Configuration
- Setup
- Dump
- Saving the Active Switch Configuration
- Restoring the Active Switch Configuration
- The Operations Menu
- The Boot Options Menu
- The Maintenance Menu
- Alteon OS Syslog Messages
- Alteon OS SNMP Agent
- Glossary
- Index

Alteon OS Command Reference
282
The Configuration Menu 43W7774, May 2007
/cfg/l3/igmp
IGMP Configuration
Table 6-79 describes the commands used to configure basic IGMP parameters.
[IGMP Menu]
snoop - IGMP Snoop Menu
relay - IGMP Relay Menu
mrouter - Static Multicast Router Menu
igmpflt - IGMP Filtering Menu
adv - IGMP Advanced Menu
on - Globally turn IGMP ON
off - Globally turn IGMP OFF
cur - Display current IGMP configuration
Table 6-79 IGMP Menu Options (/cfg/l3/igmp)
Command Syntax and Usage
snoop
Displays the IGMP Snoop Menu. To view menu options, see page 283.
relay
Displays the IGMP Relay Menu. To view menu options, see page 285.
mrouter
Displays the Static Multicast Router Menu. To view menu options, see page 287.
igmpflt
Displays the IGMP Filtering Menu. To view menu options, see page 288.
adv
Displays the IGMP Advanced Menu. To view menu options, see page 291.
on
Globally turns IGMP on.
off
Globally turns IGMP off.
cur
Displays the current IGMP configuration parameters.