User's Manual
Table Of Contents
- Contents
- Preface
- The Command Line Interface
- First-Time Configuration
- Using the Setup Utility
- Setting Passwords
- Menu Basics
- The Information Menu
- Information Menu
- System Information
- Layer 2 Information
- Layer 3 Information
- IP Routing Information
- ARP Information
- BGP Information
- BGP Peer information
- BGP Summary information
- OSPF Information
- Routing Information Protocol Information
- IP Information
- IGMP Multicast Group Information
- IGMP Group Information
- IGMP Multicast Router Port Information
- IGMP Mrouter Information
- VRRP Information
- Quality of Service Information
- 802.1p Information
- Access Control List Information
- Link Status Information
- Port Information
- Logical Port to GEA Port Mapping
- Fiber Port SFP Status
- Information Dump
- The Statistics Menu
- The Configuration Menu
- Configuration Menu
- Viewing, Applying, and Saving Changes
- System Configuration
- Port Configuration
- Layer 2 Configuration
- 802.1x Configuration
- Rapid Spanning Tree Protocol/ Multiple Spanning Tree Protocol Configuration
- Common Internal Spanning Tree Configuration
- Spanning Tree Configuration
- GVRP Configuration
- GVRP Port Configuration
- Trunk Configuration
- IP Trunk Hash Configuration
- LACP Configuration
- Layer 2 Failover Configuration
- VLAN Configuration
- Protocol-based VLAN Configuration
- Private VLAN Configuration
- Layer 3 Configuration
- IP Interface Configuration
- Default Gateway Configuration
- IP Static Route Configuration
- IP Multicast Route Configuration
- ARP Configuration
- IP Forwarding Configuration
- Network Filter Configuration
- Routing Map Configuration
- Routing Information Protocol Configuration
- Open Shortest Path First Configuration
- Border Gateway Protocol Configuration
- IGMP Configuration
- Domain Name System Configuration
- Bootstrap Protocol Relay Configuration
- VRRP Configuration
- Quality of Service Configuration
- Access Control List Configuration
- Port Mirroring Configuration
- Setup
- Dump
- Saving the Active Switch Configuration
- Restoring the Active Switch Configuration
- The Operations Menu
- The Boot Options Menu
- The Maintenance Menu
- Alteon OS Syslog Messages
- Alteon OS SNMP Agent
- Glossary
- Index
Alteon OS Command Reference
280
The Configuration Menu 43W7774, May 2007
/cfg/l3/bgp/peer/redist
BGP Redistribution Configuration
[Redistribution Menu]
metric - Set default-metric of advertised routes
default - Set default route action
rip - Enable/disable advertising RIP routes
ospf - Enable/disable advertising OSPF routes
fixed - Enable/disable advertising fixed routes
static - Enable/disable advertising static routes
cur - Display current redistribution configuration
Table 6-77 BGP Redistribution Menu Options (/cfg/l3/bgp/peer/redist)
Command Syntax and Usage
metric <metric (1-4294967294)>|none
Sets default metric of advertised routes.
default none|import|originate|redistribute
Sets default route action.
Defaults routes can be configured as import, originate, redistribute, or none.
None: No routes are configured
Import: Import these routes.
Originate: The switch sends a default route to peers if it does not have any default routes in its
routing table.
Redistribute: Default routes are either configured through default gateway or learned through
other protocols and redistributed to peer. If the routes are learned from default gateway configura-
tion, you have to enable static routes since the routes from default gateway are static routes. Simi-
larly, if the routes are learned from a certain routing protocol, you have to enable that protocol in
this redistribute submenu.
rip disable|enable
Enables or disables advertising RIP routes
ospf disable|enable
Enables or disables advertising OSPF routes.
fixed disable|enable
Enables or disables advertising fixed routes.
static disable|enable
Enables or disables advertising static routes.
current
Displays current redistribution configuration.