User's Manual
Table Of Contents
- Contents
- Preface
- The Command Line Interface
- First-Time Configuration
- Using the Setup Utility
- Setting Passwords
- Menu Basics
- The Information Menu
- Information Menu
- System Information
- Layer 2 Information
- Layer 3 Information
- IP Routing Information
- ARP Information
- BGP Information
- BGP Peer information
- BGP Summary information
- OSPF Information
- Routing Information Protocol Information
- IP Information
- IGMP Multicast Group Information
- IGMP Group Information
- IGMP Multicast Router Port Information
- IGMP Mrouter Information
- VRRP Information
- Quality of Service Information
- 802.1p Information
- Access Control List Information
- Link Status Information
- Port Information
- Logical Port to GEA Port Mapping
- Fiber Port SFP Status
- Information Dump
- The Statistics Menu
- The Configuration Menu
- Configuration Menu
- Viewing, Applying, and Saving Changes
- System Configuration
- Port Configuration
- Layer 2 Configuration
- 802.1x Configuration
- Rapid Spanning Tree Protocol/ Multiple Spanning Tree Protocol Configuration
- Common Internal Spanning Tree Configuration
- Spanning Tree Configuration
- GVRP Configuration
- GVRP Port Configuration
- Trunk Configuration
- IP Trunk Hash Configuration
- LACP Configuration
- Layer 2 Failover Configuration
- VLAN Configuration
- Protocol-based VLAN Configuration
- Private VLAN Configuration
- Layer 3 Configuration
- IP Interface Configuration
- Default Gateway Configuration
- IP Static Route Configuration
- IP Multicast Route Configuration
- ARP Configuration
- IP Forwarding Configuration
- Network Filter Configuration
- Routing Map Configuration
- Routing Information Protocol Configuration
- Open Shortest Path First Configuration
- Border Gateway Protocol Configuration
- IGMP Configuration
- Domain Name System Configuration
- Bootstrap Protocol Relay Configuration
- VRRP Configuration
- Quality of Service Configuration
- Access Control List Configuration
- Port Mirroring Configuration
- Setup
- Dump
- Saving the Active Switch Configuration
- Restoring the Active Switch Configuration
- The Operations Menu
- The Boot Options Menu
- The Maintenance Menu
- Alteon OS Syslog Messages
- Alteon OS SNMP Agent
- Glossary
- Index
Alteon OS Command Reference
The Configuration Menu
27343W7774, May 2007
/cfg/l3/ospf/host <host number>
OSPF Host Entry Configuration
disable
Disables OSPF virtual link.
delete
Deletes OSPF virtual link.
cur
Displays the current OSPF virtual link settings.
[OSPF Host Entry 1 Menu]
addr - Set host entry IP address
aindex - Set area index
cost - Set cost of this host entry
enable - Enable host entry
disable - Disable host entry
delete - Delete host entry
cur - Display current OSPF host entry configuration
Table 6-72 OSPF Host Entry Configuration Menu Options (/cfg/l3/ospf/host)
Command Syntax and Usage
addr <IP address (such as, 192.4.17.101)>
Configures the base IP address for the host entry.
aindex <area index (0-2)>
Configures the area index of the host.
cost <cost value (1-65535)>
Configures the cost value of the host.
enable
Enables OSPF host entry.
disable
Disables OSPF host entry.
Table 6-71 OSPF Virtual Link Configuration Menu Options (/cfg/l3/ospf/virt)
Command Syntax and Usage