User's Manual
Table Of Contents
- Contents
- Preface
- The Command Line Interface
- First-Time Configuration
- Using the Setup Utility
- Setting Passwords
- Menu Basics
- The Information Menu
- Information Menu
- System Information
- Layer 2 Information
- Layer 3 Information
- IP Routing Information
- ARP Information
- BGP Information
- BGP Peer information
- BGP Summary information
- OSPF Information
- Routing Information Protocol Information
- IP Information
- IGMP Multicast Group Information
- IGMP Group Information
- IGMP Multicast Router Port Information
- IGMP Mrouter Information
- VRRP Information
- Quality of Service Information
- 802.1p Information
- Access Control List Information
- Link Status Information
- Port Information
- Logical Port to GEA Port Mapping
- Fiber Port SFP Status
- Information Dump
- The Statistics Menu
- The Configuration Menu
- Configuration Menu
- Viewing, Applying, and Saving Changes
- System Configuration
- Port Configuration
- Layer 2 Configuration
- 802.1x Configuration
- Rapid Spanning Tree Protocol/ Multiple Spanning Tree Protocol Configuration
- Common Internal Spanning Tree Configuration
- Spanning Tree Configuration
- GVRP Configuration
- GVRP Port Configuration
- Trunk Configuration
- IP Trunk Hash Configuration
- LACP Configuration
- Layer 2 Failover Configuration
- VLAN Configuration
- Protocol-based VLAN Configuration
- Private VLAN Configuration
- Layer 3 Configuration
- IP Interface Configuration
- Default Gateway Configuration
- IP Static Route Configuration
- IP Multicast Route Configuration
- ARP Configuration
- IP Forwarding Configuration
- Network Filter Configuration
- Routing Map Configuration
- Routing Information Protocol Configuration
- Open Shortest Path First Configuration
- Border Gateway Protocol Configuration
- IGMP Configuration
- Domain Name System Configuration
- Bootstrap Protocol Relay Configuration
- VRRP Configuration
- Quality of Service Configuration
- Access Control List Configuration
- Port Mirroring Configuration
- Setup
- Dump
- Saving the Active Switch Configuration
- Restoring the Active Switch Configuration
- The Operations Menu
- The Boot Options Menu
- The Maintenance Menu
- Alteon OS Syslog Messages
- Alteon OS SNMP Agent
- Glossary
- Index
Alteon OS Command Reference
248
The Configuration Menu 43W7774, May 2007
/cfg/l3
Layer 3 Configuration
[Layer 3 Menu]
if - Interface Menu
gw - Default Gateway Menu
route - Static Route Menu
mroute - Static IP Multicast Route Menu
arp - ARP Menu
frwd - Forwarding Menu
nwf - Network Filters Menu
rmap - Route Map Menu
rip - Routing Information Protocol Menu
ospf - Open Shortest Path First (OSPF) Menu
bgp - Border Gateway Protocol Menu
igmp - IGMP Menu
dns - Domain Name System Menu
bootp - Bootstrap Protocol Relay Menu
vrrp - Virtual Router Redundancy Protocol Menu
rtrid - Set router ID
cur - Display current IP configuration
Table 6-53 Layer 3 Configuration Menu (/cfg/l3)
Command Syntax and Usage
if <interface number (1-128)>
Displays the IP Interface Menu. To view menu options, see page 250.
gw <default gateway number (1-4)>
Displays the IP Default Gateway Menu. To view menu options, see page 251.
route
Displays the IP Static Route Menu. To view menu options, see page 253.
mroute
Displays the Static IP Multicast Route Menu. To view menu options, see page 254.
arp
Displays the Address Resolution Protocol Menu. To view menu options, see page 255.
frwd
Displays the IP Forwarding Menu. To view menu options, see page 257.
nwf <Network filter number (1-256)>
Displays the Network Filter Configuration Menu. To view menu options see page 258.