User's Manual
Table Of Contents
- Contents
- Preface
- The Command Line Interface
- First-Time Configuration
- Using the Setup Utility
- Setting Passwords
- Menu Basics
- The Information Menu
- Information Menu
- System Information
- Layer 2 Information
- Layer 3 Information
- IP Routing Information
- ARP Information
- BGP Information
- BGP Peer information
- BGP Summary information
- OSPF Information
- Routing Information Protocol Information
- IP Information
- IGMP Multicast Group Information
- IGMP Group Information
- IGMP Multicast Router Port Information
- IGMP Mrouter Information
- VRRP Information
- Quality of Service Information
- 802.1p Information
- Access Control List Information
- Link Status Information
- Port Information
- Logical Port to GEA Port Mapping
- Fiber Port SFP Status
- Information Dump
- The Statistics Menu
- The Configuration Menu
- Configuration Menu
- Viewing, Applying, and Saving Changes
- System Configuration
- Port Configuration
- Layer 2 Configuration
- 802.1x Configuration
- Rapid Spanning Tree Protocol/ Multiple Spanning Tree Protocol Configuration
- Common Internal Spanning Tree Configuration
- Spanning Tree Configuration
- GVRP Configuration
- GVRP Port Configuration
- Trunk Configuration
- IP Trunk Hash Configuration
- LACP Configuration
- Layer 2 Failover Configuration
- VLAN Configuration
- Protocol-based VLAN Configuration
- Private VLAN Configuration
- Layer 3 Configuration
- IP Interface Configuration
- Default Gateway Configuration
- IP Static Route Configuration
- IP Multicast Route Configuration
- ARP Configuration
- IP Forwarding Configuration
- Network Filter Configuration
- Routing Map Configuration
- Routing Information Protocol Configuration
- Open Shortest Path First Configuration
- Border Gateway Protocol Configuration
- IGMP Configuration
- Domain Name System Configuration
- Bootstrap Protocol Relay Configuration
- VRRP Configuration
- Quality of Service Configuration
- Access Control List Configuration
- Port Mirroring Configuration
- Setup
- Dump
- Saving the Active Switch Configuration
- Restoring the Active Switch Configuration
- The Operations Menu
- The Boot Options Menu
- The Maintenance Menu
- Alteon OS Syslog Messages
- Alteon OS SNMP Agent
- Glossary
- Index
Alteon OS Command Reference
The Configuration Menu
20543W7774, May 2007
/cfg/sys/access/user
User Access Control Configuration
NOTE – User passwords can be a maximum of 15 characters.
[User Access Control Menu]
uid - User ID Menu
eject - Eject user
usrpw - Set user password (user)
opw - Set operator password (oper)
admpw - Set administrator password (admin)
strongpw - Strong password menu
cur - Display current user status
Table 6-21 User Access Control Menu Options (/cfg/sys/access/user)
Command Syntax and Usage
uid <User ID (1-10)>
Displays the User ID Menu. To view menu options, see page 206.
eject user|oper|admin|<user name>
Ejects the specified user from the GbESM.
usrpw
Sets the user (user) password. The user has no direct responsibility for switch management. He or
she can view switch status information and statistics, but cannot make any configuration changes.
The user password can have a maximum of 15 characters.
opw
Sets the operator (oper)password. The operator manages all functions of the switch. He or she
can view all switch information and statistics and can reset ports or the entire switch.
The operator password can have a maximum of 15 characters.
admpw
Sets the administrator (admin) password. The super user administrator has complete access to all
menus, information, and configuration commands on the GbE Switch Module, including the abil-
ity to change both the user and administrator passwords.
Access includes “oper” functions.
strongpw
Displays the Strong User Password Menu. To view menu options, see page 207.
cur
Displays the current user status.