User's Manual
Table Of Contents
- Contents
- Preface
- The Command Line Interface
- First-Time Configuration
- Using the Setup Utility
- Setting Passwords
- Menu Basics
- The Information Menu
- Information Menu
- System Information
- Layer 2 Information
- Layer 3 Information
- IP Routing Information
- ARP Information
- BGP Information
- BGP Peer information
- BGP Summary information
- OSPF Information
- Routing Information Protocol Information
- IP Information
- IGMP Multicast Group Information
- IGMP Group Information
- IGMP Multicast Router Port Information
- IGMP Mrouter Information
- VRRP Information
- Quality of Service Information
- 802.1p Information
- Access Control List Information
- Link Status Information
- Port Information
- Logical Port to GEA Port Mapping
- Fiber Port SFP Status
- Information Dump
- The Statistics Menu
- The Configuration Menu
- Configuration Menu
- Viewing, Applying, and Saving Changes
- System Configuration
- Port Configuration
- Layer 2 Configuration
- 802.1x Configuration
- Rapid Spanning Tree Protocol/ Multiple Spanning Tree Protocol Configuration
- Common Internal Spanning Tree Configuration
- Spanning Tree Configuration
- GVRP Configuration
- GVRP Port Configuration
- Trunk Configuration
- IP Trunk Hash Configuration
- LACP Configuration
- Layer 2 Failover Configuration
- VLAN Configuration
- Protocol-based VLAN Configuration
- Private VLAN Configuration
- Layer 3 Configuration
- IP Interface Configuration
- Default Gateway Configuration
- IP Static Route Configuration
- IP Multicast Route Configuration
- ARP Configuration
- IP Forwarding Configuration
- Network Filter Configuration
- Routing Map Configuration
- Routing Information Protocol Configuration
- Open Shortest Path First Configuration
- Border Gateway Protocol Configuration
- IGMP Configuration
- Domain Name System Configuration
- Bootstrap Protocol Relay Configuration
- VRRP Configuration
- Quality of Service Configuration
- Access Control List Configuration
- Port Mirroring Configuration
- Setup
- Dump
- Saving the Active Switch Configuration
- Restoring the Active Switch Configuration
- The Operations Menu
- The Boot Options Menu
- The Maintenance Menu
- Alteon OS Syslog Messages
- Alteon OS SNMP Agent
- Glossary
- Index
Alteon OS Command Reference
The Configuration Menu
19943W7774, May 2007
/cfg/sys/ssnmp/snmpv3/taddr
SNMPv3 Target Address Table Configuration
This command is used to configure the target transport entry. The configured entry is stored in
the target address table list in the SNMP engine. This table of transport addresses is used in the
generation of SNMP messages.
[SNMPv3 snmpTargetAddrTable 1 Menu]
name - Set target address name
addr - Set target transport address IP
port - Set target transport address port
taglist - Set tag list
pname - Set targetParams name
del - Delete targetAddrTable entry
cur - Display current targetAddrTable configuration
Table 6-16 Target Address Table Menu Options (/cfg/sys/ssnmp/snmpv3/taddr)
Command Syntax and Usage
name <32 character name>
Allows you to configure the locally arbitrary, but unique identifier, target address name associated
with this entry.
addr <transport address ip>
Allows you to configure a transport address IP that can be used in the generation of SNMP traps.
port <transport address port>
Allows you to configure a transport address port that can be used in the generation of SNMP traps.
taglist <list of tag string, max 255 characters>
Allows you to configure a list of tags that are used to select target addresses for a particular opera-
tion.
pname <32 character name>
Defines the name as defined in /cfg/sys/ssnmp/snmpv3/tparam/name on page 200.
del
Deletes the Target Address Table entry.
cur
Displays the current Target Address Table configuration.