User's Manual
Table Of Contents
- Contents
- Preface
- The Command Line Interface
- First-Time Configuration
- Using the Setup Utility
- Setting Passwords
- Menu Basics
- The Information Menu
- Information Menu
- System Information
- Layer 2 Information
- Layer 3 Information
- IP Routing Information
- ARP Information
- BGP Information
- BGP Peer information
- BGP Summary information
- OSPF Information
- Routing Information Protocol Information
- IP Information
- IGMP Multicast Group Information
- IGMP Group Information
- IGMP Multicast Router Port Information
- IGMP Mrouter Information
- VRRP Information
- Quality of Service Information
- 802.1p Information
- Access Control List Information
- Link Status Information
- Port Information
- Logical Port to GEA Port Mapping
- Fiber Port SFP Status
- Information Dump
- The Statistics Menu
- The Configuration Menu
- Configuration Menu
- Viewing, Applying, and Saving Changes
- System Configuration
- Port Configuration
- Layer 2 Configuration
- 802.1x Configuration
- Rapid Spanning Tree Protocol/ Multiple Spanning Tree Protocol Configuration
- Common Internal Spanning Tree Configuration
- Spanning Tree Configuration
- GVRP Configuration
- GVRP Port Configuration
- Trunk Configuration
- IP Trunk Hash Configuration
- LACP Configuration
- Layer 2 Failover Configuration
- VLAN Configuration
- Protocol-based VLAN Configuration
- Private VLAN Configuration
- Layer 3 Configuration
- IP Interface Configuration
- Default Gateway Configuration
- IP Static Route Configuration
- IP Multicast Route Configuration
- ARP Configuration
- IP Forwarding Configuration
- Network Filter Configuration
- Routing Map Configuration
- Routing Information Protocol Configuration
- Open Shortest Path First Configuration
- Border Gateway Protocol Configuration
- IGMP Configuration
- Domain Name System Configuration
- Bootstrap Protocol Relay Configuration
- VRRP Configuration
- Quality of Service Configuration
- Access Control List Configuration
- Port Mirroring Configuration
- Setup
- Dump
- Saving the Active Switch Configuration
- Restoring the Active Switch Configuration
- The Operations Menu
- The Boot Options Menu
- The Maintenance Menu
- Alteon OS Syslog Messages
- Alteon OS SNMP Agent
- Glossary
- Index
Alteon OS Command Reference
194
The Configuration Menu 43W7774, May 2007
cfg/sys/ssnmp/snmpv3/view
SNMPv3 View Configuration
del
Deletes the USM user entries.
cur
Displays the USM user entries.
[SNMPv3 vacmViewTreeFamily 1 Menu]
name - Set view name
tree - Set MIB subtree(OID) which defines a family of view subtrees
mask - Set view mask
type - Set view type
del - Delete vacmViewTreeFamily entry
cur - Display current vacmViewTreeFamily configuration
Table 6-12 SNMPv3 View Menu Options (/cfg/sys/ssnmp/snmpv3/view)
Command Syntax and Usage
name <32 character name>
This command defines the name for a family of view subtrees up to a maximum of 32 characters.
tree <object identifier, such as,. 1.3.6.1.2.1.1.1.0, max 32 characters>
This command defines MIB tree, a string of maximum 32 characters, which when combined with
the corresponding mask defines a family of view subtrees.
mask <bitmask, max size 32 characters>
This command defines the bit mask, which in combination with the corresponding tree defines a
family of view subtrees.
type included|excluded
This command indicates whether the corresponding instances of vacmViewTreeFamilySub-
tree and vacmViewTreeFamilyMask define a family of view subtrees, which is included
in or excluded from the MIB view.
del
Deletes the vacmViewTreeFamily group entry.
cur
Displays the current vacmViewTreeFamily configuration.
Table 6-11 User Security Model Configuration Menu Options (/cfg/sys/ssnmp/
snmpv3/usm)
Command Syntax and Usage