User's Manual
Table Of Contents
- Contents
- Preface
- The Command Line Interface
- First-Time Configuration
- Using the Setup Utility
- Setting Passwords
- Menu Basics
- The Information Menu
- Information Menu
- System Information
- Layer 2 Information
- Layer 3 Information
- IP Routing Information
- ARP Information
- BGP Information
- BGP Peer information
- BGP Summary information
- OSPF Information
- Routing Information Protocol Information
- IP Information
- IGMP Multicast Group Information
- IGMP Group Information
- IGMP Multicast Router Port Information
- IGMP Mrouter Information
- VRRP Information
- Quality of Service Information
- 802.1p Information
- Access Control List Information
- Link Status Information
- Port Information
- Logical Port to GEA Port Mapping
- Fiber Port SFP Status
- Information Dump
- The Statistics Menu
- The Configuration Menu
- Configuration Menu
- Viewing, Applying, and Saving Changes
- System Configuration
- Port Configuration
- Layer 2 Configuration
- 802.1x Configuration
- Rapid Spanning Tree Protocol/ Multiple Spanning Tree Protocol Configuration
- Common Internal Spanning Tree Configuration
- Spanning Tree Configuration
- GVRP Configuration
- GVRP Port Configuration
- Trunk Configuration
- IP Trunk Hash Configuration
- LACP Configuration
- Layer 2 Failover Configuration
- VLAN Configuration
- Protocol-based VLAN Configuration
- Private VLAN Configuration
- Layer 3 Configuration
- IP Interface Configuration
- Default Gateway Configuration
- IP Static Route Configuration
- IP Multicast Route Configuration
- ARP Configuration
- IP Forwarding Configuration
- Network Filter Configuration
- Routing Map Configuration
- Routing Information Protocol Configuration
- Open Shortest Path First Configuration
- Border Gateway Protocol Configuration
- IGMP Configuration
- Domain Name System Configuration
- Bootstrap Protocol Relay Configuration
- VRRP Configuration
- Quality of Service Configuration
- Access Control List Configuration
- Port Mirroring Configuration
- Setup
- Dump
- Saving the Active Switch Configuration
- Restoring the Active Switch Configuration
- The Operations Menu
- The Boot Options Menu
- The Maintenance Menu
- Alteon OS Syslog Messages
- Alteon OS SNMP Agent
- Glossary
- Index
Alteon OS Command Reference
The Configuration Menu
17743W7774, May 2007
/cfg/sys/syslog
System Host Log Configuration
[Syslog Menu]
host - Set IP address of first syslog host
host2 - Set IP address of second syslog host
sever - Set the severity of first syslog host
sever2 - Set the severity of second syslog host
facil - Set facility of first syslog host
facil2 - Set facility of second syslog host
console - Enable/disable console output of syslog messages
log - Enable/disable syslogging of features
cur - Display current syslog settings
Table 6-3 Host Log Menu Options (/cfg/sys/syslog)
Command Syntax and Usage
host <new syslog host IP address (such as, 192.4.17.223)>
Sets the IP address of the first syslog host.
host2 <new syslog host IP address (such as, 192.4.17.223)>
Sets the IP address of the second syslog host.
sever <syslog host local severity (0–7)>
This option sets the severity level of the first syslog host displayed. The default is 7, which means
log all severity levels.
sever2 <syslog host local severity (0–7)>
This option sets the severity level of the second syslog host displayed. The default is 7, which
means, log all severity levels.
facil <syslog host local facility (0-7)>
This option sets the facility level of the first syslog host displayed. The default is 0.
facil2 <syslog host local facility (0-7)>
This option sets the facility level of the second syslog host displayed. The default is 0.
console disable|enable
Enables or disables delivering syslog messages to the console. When necessary, disabling con-
sole ensures the switch is not affected by syslog messages. It is enabled by default.
log <feature|all> <enable|disable>
Displays a list of features for which syslog messages can be generated. You can choose to enable/
disable specific features (such as vlans, stg, or servers), or enable/disable syslog on all available
features.
cur
Displays the current syslog settings.