User's Manual
Table Of Contents
- Contents
- Preface
- The Command Line Interface
- First-Time Configuration
- Using the Setup Utility
- Setting Passwords
- Menu Basics
- The Information Menu
- Information Menu
- System Information
- Layer 2 Information
- Layer 3 Information
- IP Routing Information
- ARP Information
- BGP Information
- BGP Peer information
- BGP Summary information
- OSPF Information
- Routing Information Protocol Information
- IP Information
- IGMP Multicast Group Information
- IGMP Group Information
- IGMP Multicast Router Port Information
- IGMP Mrouter Information
- VRRP Information
- Quality of Service Information
- 802.1p Information
- Access Control List Information
- Link Status Information
- Port Information
- Logical Port to GEA Port Mapping
- Fiber Port SFP Status
- Information Dump
- The Statistics Menu
- The Configuration Menu
- Configuration Menu
- Viewing, Applying, and Saving Changes
- System Configuration
- Port Configuration
- Layer 2 Configuration
- 802.1x Configuration
- Rapid Spanning Tree Protocol/ Multiple Spanning Tree Protocol Configuration
- Common Internal Spanning Tree Configuration
- Spanning Tree Configuration
- GVRP Configuration
- GVRP Port Configuration
- Trunk Configuration
- IP Trunk Hash Configuration
- LACP Configuration
- Layer 2 Failover Configuration
- VLAN Configuration
- Protocol-based VLAN Configuration
- Private VLAN Configuration
- Layer 3 Configuration
- IP Interface Configuration
- Default Gateway Configuration
- IP Static Route Configuration
- IP Multicast Route Configuration
- ARP Configuration
- IP Forwarding Configuration
- Network Filter Configuration
- Routing Map Configuration
- Routing Information Protocol Configuration
- Open Shortest Path First Configuration
- Border Gateway Protocol Configuration
- IGMP Configuration
- Domain Name System Configuration
- Bootstrap Protocol Relay Configuration
- VRRP Configuration
- Quality of Service Configuration
- Access Control List Configuration
- Port Mirroring Configuration
- Setup
- Dump
- Saving the Active Switch Configuration
- Restoring the Active Switch Configuration
- The Operations Menu
- The Boot Options Menu
- The Maintenance Menu
- Alteon OS Syslog Messages
- Alteon OS SNMP Agent
- Glossary
- Index
Alteon OS Command Reference
142
The Statistics Menu 43W7774, May 2007
icmp
Displays ICMP statistics. See page 146 for sample output.
tcp
Displays TCP statistics. See page 149 for sample output.
udp
Displays UDP statistics. See page 151 for sample output.
igmp
Displays IGMP statistics. See page 152 for sample output.
ospf
Displays OSPF statistics. See page 153 for sample output.
vrrp
When virtual routers are configured, you can display protocol statistics for VRRP:
See page 158 for sample output.
clrvrrp
Clears VRRP statistics.
rip
Displays Routing Information Protocol (RIP) statistics. See page 159 for sample output.
igmpgrps
Displays the total number of IGMP groups that are registered on the switch.
ipmcgrps
Displays the total number of current IP multicast groups that are registered on the switch.
clrigmp
Clears IGMP statistics.
ipclear
Clears IP statistics. Use this command with caution as it will delete all the IP statistics.
dump
Dumps all Layer 3 statistics. Use this command to gather data for tuning and debugging switch
performance. If you want to capture dump data to a file, set your communication software on your
workstation to capture session data prior to issuing the dump command.
Table 5-14 Layer 3 Statistics Menu Options (/stats/l3)
Command Syntax and Usage