User's Manual
Table Of Contents
- Contents
- Preface
- The Command Line Interface
- First-Time Configuration
- Using the Setup Utility
- Setting Passwords
- Menu Basics
- The Information Menu
- Information Menu
- System Information
- Layer 2 Information
- Layer 3 Information
- IP Routing Information
- ARP Information
- BGP Information
- BGP Peer information
- BGP Summary information
- OSPF Information
- Routing Information Protocol Information
- IP Information
- IGMP Multicast Group Information
- IGMP Group Information
- IGMP Multicast Router Port Information
- IGMP Mrouter Information
- VRRP Information
- Quality of Service Information
- 802.1p Information
- Access Control List Information
- Link Status Information
- Port Information
- Logical Port to GEA Port Mapping
- Fiber Port SFP Status
- Information Dump
- The Statistics Menu
- The Configuration Menu
- Configuration Menu
- Viewing, Applying, and Saving Changes
- System Configuration
- Port Configuration
- Layer 2 Configuration
- 802.1x Configuration
- Rapid Spanning Tree Protocol/ Multiple Spanning Tree Protocol Configuration
- Common Internal Spanning Tree Configuration
- Spanning Tree Configuration
- GVRP Configuration
- GVRP Port Configuration
- Trunk Configuration
- IP Trunk Hash Configuration
- LACP Configuration
- Layer 2 Failover Configuration
- VLAN Configuration
- Protocol-based VLAN Configuration
- Private VLAN Configuration
- Layer 3 Configuration
- IP Interface Configuration
- Default Gateway Configuration
- IP Static Route Configuration
- IP Multicast Route Configuration
- ARP Configuration
- IP Forwarding Configuration
- Network Filter Configuration
- Routing Map Configuration
- Routing Information Protocol Configuration
- Open Shortest Path First Configuration
- Border Gateway Protocol Configuration
- IGMP Configuration
- Domain Name System Configuration
- Bootstrap Protocol Relay Configuration
- VRRP Configuration
- Quality of Service Configuration
- Access Control List Configuration
- Port Mirroring Configuration
- Setup
- Dump
- Saving the Active Switch Configuration
- Restoring the Active Switch Configuration
- The Operations Menu
- The Boot Options Menu
- The Maintenance Menu
- Alteon OS Syslog Messages
- Alteon OS SNMP Agent
- Glossary
- Index
Alteon OS Command Reference
128
The Statistics Menu 43W7774, May 2007
authTimeoutsWhile-
Authenticating
Total number of times that the state machine transitions from
AUTHENTICATING to ABORTING, as a result of the Backend Authen-
tication state machine indicating authentication timeout.
authFailWhileAu-
thenticating
Total
number of times that the state machine transitions from
AUTHENTICATING to HELD, as a
result of the Backend Authenti-
cation state machine indicating authentication failure.
authReauthsWhile-
Authenticating
Total number of times that the state machine transitions from AUTHEN-
TICATING to ABORTING, as a result of a re-authentication request
authEapStartsWhi-
leAuthenticating
Total
number of times that the state machine transitions from
AUTHENTICATING to ABORTING, as
a result of an EAPOL-Start
message being received from the Supplicant.
authEapLogoffWhi-
leAuthenticating
Total number of times that the state machine transitions from
AUTHENTICATING to ABORTING, as a result of an EAPOL-Logoff
message being received from the Supplicant.
authReauthsWhile-
Authenticated
Total number of times that the state machine transitions from AUTHEN-
TICATED to CONNECTING, as a result of a re-authentication request.
authEapStartsWhi-
leAuthenticated
Total number of times that the state machine transitions from
AUTHENTICATED to CONNECTING, as a result of an EAPOL-Start
message being received from the Supplicant.
authEapLogoffWhi-
leAuthenticated
Total number of times that the state machine transitions from
AUTHENTICATED to DISCONNECTED, as a result of an EAPOL-
Logoff message being received from the Supplicant.
backendResponses Total number of times that the state machine sends an initial Access-
Request packet to the Authentication server. Indicates that the Authenti-
cator attempted communication with the Authentication Server.
backendAccessChal-
lenges
Total number of times that the state machine receives an initial Access-
Challenge packet from the Authentication server. Indicates that the
Authentication Server has communication with the Authenticator.
backendOtherRe-
questsToSupplicant
Total number of times that the state machine sends an EAP-Request
packet (other than an Identity, Notification, Failure, or Success message)
to the Supplicant. Indicates that the Authenticator chose an EAP-method.
backendNonNakRe-
sponsesFromSuppli-
cant
Total number of times that the state machine receives a response from the
Supplicant to an initial EAP-Request, and the response is something other
than EAP-NAK. Indicates that the Supplicant can respond to the Authen-
ticator.s chosen EAP-method.
Table 5-4 802.1x Authenticator Diagnostics of a Port (/stats/port/8021x)
Statistics Description