User's Manual
Table Of Contents
- Contents
- Preface
- The Command Line Interface
- First-Time Configuration
- Using the Setup Utility
- Setting Passwords
- Menu Basics
- The Information Menu
- Information Menu
- System Information
- Layer 2 Information
- Layer 3 Information
- IP Routing Information
- ARP Information
- BGP Information
- BGP Peer information
- BGP Summary information
- OSPF Information
- Routing Information Protocol Information
- IP Information
- IGMP Multicast Group Information
- IGMP Group Information
- IGMP Multicast Router Port Information
- IGMP Mrouter Information
- VRRP Information
- Quality of Service Information
- 802.1p Information
- Access Control List Information
- Link Status Information
- Port Information
- Logical Port to GEA Port Mapping
- Fiber Port SFP Status
- Information Dump
- The Statistics Menu
- The Configuration Menu
- Configuration Menu
- Viewing, Applying, and Saving Changes
- System Configuration
- Port Configuration
- Layer 2 Configuration
- 802.1x Configuration
- Rapid Spanning Tree Protocol/ Multiple Spanning Tree Protocol Configuration
- Common Internal Spanning Tree Configuration
- Spanning Tree Configuration
- GVRP Configuration
- GVRP Port Configuration
- Trunk Configuration
- IP Trunk Hash Configuration
- LACP Configuration
- Layer 2 Failover Configuration
- VLAN Configuration
- Protocol-based VLAN Configuration
- Private VLAN Configuration
- Layer 3 Configuration
- IP Interface Configuration
- Default Gateway Configuration
- IP Static Route Configuration
- IP Multicast Route Configuration
- ARP Configuration
- IP Forwarding Configuration
- Network Filter Configuration
- Routing Map Configuration
- Routing Information Protocol Configuration
- Open Shortest Path First Configuration
- Border Gateway Protocol Configuration
- IGMP Configuration
- Domain Name System Configuration
- Bootstrap Protocol Relay Configuration
- VRRP Configuration
- Quality of Service Configuration
- Access Control List Configuration
- Port Mirroring Configuration
- Setup
- Dump
- Saving the Active Switch Configuration
- Restoring the Active Switch Configuration
- The Operations Menu
- The Boot Options Menu
- The Maintenance Menu
- Alteon OS Syslog Messages
- Alteon OS SNMP Agent
- Glossary
- Index

Alteon OS Command Reference
The Statistics Menu
12543W7774, May 2007
/stats/port <port alias or number>
Port Statistics
This menu displays traffic statistics on a port-by-port basis. Traffic statistics include SNMP
Management Information Base (MIB) objects.
[Port Statistics Menu]
8021x - Show 802.1x stats
brg - Show bridging ("dot1") stats
ether - Show Ethernet ("dot3") stats
if - Show interface ("if") stats
ip - Show Internet Protocol ("IP") stats
link - Show link stats
clear - Clear all port stats
Table 5-2 Port Statistics Menu Options (/stats/port)
Command Syntax and Usage
8021x
Displays IEEE 802.1x statistics for the port. See page 127 for sample output.
brg
Displays bridging (“dot1”) statistics for the port. See page 129 for sample output.
ether
Displays Ethernet (“dot3”) statistics for the port. See page 131 for sample output.
if
Displays interface statistics for the port. See page 134 for sample output.
ip
Displays IP statistics for the port. See page 136 for sample output.
link
Displays link statistics for the port. See page 136 for sample output.
clear
This command clears all the statistics on the port.