User's Manual
Table Of Contents
- Contents
- Preface
- The Command Line Interface
- First-Time Configuration
- Using the Setup Utility
- Setting Passwords
- Menu Basics
- The Information Menu
- Information Menu
- System Information
- Layer 2 Information
- Layer 3 Information
- IP Routing Information
- ARP Information
- BGP Information
- BGP Peer information
- BGP Summary information
- OSPF Information
- Routing Information Protocol Information
- IP Information
- IGMP Multicast Group Information
- IGMP Group Information
- IGMP Multicast Router Port Information
- IGMP Mrouter Information
- VRRP Information
- Quality of Service Information
- 802.1p Information
- Access Control List Information
- Link Status Information
- Port Information
- Logical Port to GEA Port Mapping
- Fiber Port SFP Status
- Information Dump
- The Statistics Menu
- The Configuration Menu
- Configuration Menu
- Viewing, Applying, and Saving Changes
- System Configuration
- Port Configuration
- Layer 2 Configuration
- 802.1x Configuration
- Rapid Spanning Tree Protocol/ Multiple Spanning Tree Protocol Configuration
- Common Internal Spanning Tree Configuration
- Spanning Tree Configuration
- GVRP Configuration
- GVRP Port Configuration
- Trunk Configuration
- IP Trunk Hash Configuration
- LACP Configuration
- Layer 2 Failover Configuration
- VLAN Configuration
- Protocol-based VLAN Configuration
- Private VLAN Configuration
- Layer 3 Configuration
- IP Interface Configuration
- Default Gateway Configuration
- IP Static Route Configuration
- IP Multicast Route Configuration
- ARP Configuration
- IP Forwarding Configuration
- Network Filter Configuration
- Routing Map Configuration
- Routing Information Protocol Configuration
- Open Shortest Path First Configuration
- Border Gateway Protocol Configuration
- IGMP Configuration
- Domain Name System Configuration
- Bootstrap Protocol Relay Configuration
- VRRP Configuration
- Quality of Service Configuration
- Access Control List Configuration
- Port Mirroring Configuration
- Setup
- Dump
- Saving the Active Switch Configuration
- Restoring the Active Switch Configuration
- The Operations Menu
- The Boot Options Menu
- The Maintenance Menu
- Alteon OS Syslog Messages
- Alteon OS SNMP Agent
- Glossary
- Index
Alteon OS Command Reference
108
The Information Menu 43W7774, May 2007
dbsumm
Displays the following information about the LS database in a table format:
a) the number of LSAs of each type in each area.
b) the total number of LSAs for each area.
c) the total number of LSAs for each LSA type for all areas combined.
d) the total number of LSAs for all LSA types for all areas combined.
No parameters are required.
ext <adv-rtr (A.B.C.D)>|<link_state_id (A.B.C.D>|<self>
Displays the AS-external (type 5) LSAs with detailed information of each field of the LSAs. The
usage of this command is the same as the usage of the command asbrsum.
nw <adv-rtr (A.B.C.D)>|<link_state_id (A.B.C.D>|<self>
Displays the network (type 2) LSAs with detailed information of each field of the LSA.network LS
database. The usage of this command is the same as the usage of the command asbrsum.
nssa <adv-rtr (A.B.C.D)>|<link_state_id (A.B.C.D>|<self>
Displays the NSSA (type 7) LSAs with detailed information of each field of the LSAs. The usage
of this command is the same as the usage of the command asbrsum.
rtr <adv-rtr (A.B.C.D)>|<link_state_id (A.B.C.D>|<self>
Displays the router (type 1) LSAs with detailed information of each field of the LSAs. The usage
of this command is the same as the usage of the command asbrsum.
self
Displays all the self-advertised LSAs. No parameters are required.
summ <adv-rtr (A.B.C.D)>|<link_state_id (A.B.C.D>|<self>
Displays the network summary (type 3) LSAs with detailed information of each field of the LSAs.
The usage of this command is the same as the usage of the command asbrsum.
all
Displays all the LSAs.
Table 4-30 OSPF Database Information Menu Options (/info/l3/ospf/dbase)
Command Syntax and Usage