User manual

52 Chapter 3 Contivity 2600 Option Installation
302283-D Rev 00
Installing LAN/WAN and hardware accelerator option
cards
Figure 20 shows you how to install LAN, WAN, or hardware accelerator option
cards into the switch. You can use Slots 1 to 4 for any mix of LAN and WAN
cards.
Figure 20 Installing LAN/WAN or hardware accelerator cards
To remove the front bezel and cover, you need a Phillips screwdriver.
1
Power off the switch.
2
Remove the power cord.
Motherboard
Option card
Filler panel
Rear of unit
Option card slots
CS2600017A