User manual

Configuring WLAN mesh services 283
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Configuring WLAN mesh services
The basic configuration procedure for WLAN mesh services consists of the following tasks:
• Attach the Mesh AP to the network and configure mesh services.
• Configure a service profile for mesh services.
• Set the security parameters to allow the Mesh AP to authenticate the network.
• Optional—configure the Mesh Portal AP to emit link calibration packets and aid with positioning the Mesh
AP.
• Detach the Mesh AP from the network and deploy the AP in a final location.
After the Mesh AP is installed in a final location and establishes a connection to the Mesh Portal AP, it can be config-
ured as any other AP on the WSS.