User manual

114 Troubleshooting
Error Status screen
The Error Status screen displays any alarms that indicate some system
malfunction. Some of these alarms are easily remedied. Others require
a call to Nortel Technical Support.
From the System Status Menu screen, select Error Status. The Error
Status screen displays active alarms on the WLAN IP Telephony Manager
2245. Table 15 "WLAN IP Telephony Manager 2245 active alarms and
actions" (page 114) lists the alarms and the actions required to eliminate
the alarm.
Table 15
WLAN IP Telephony Manager 2245 active alarms and actions
Alarm text Action
Maximum payload usage reached Reduce usage, clear alarm
Maximum telephone usage reached Reduce usage, clear alarm
Maximum Access Point usage reached Reduce usage, clear alarm
Maximum call usage reached Reduce usage, clear alarm
SRP audio delayed Reduce usage, clear alarm
SRP audio lost Reduce usage, clear alarm
No IP address Configure an IP address
Press C to clear all clearable alarms.
Network Status screen
The WLAN IP Telephony Manager 2245 is connected to the Ethernet
network (LAN). The information about that connection is provided on
the Network Status screen. The screen displays information about
the Ethernet network. This information can help troubleshoot network
problems.
To access the Network Status screen, select Network Status from the
System Status Menu screen.
Use the Network Status screen to view the following information:
• Ethernet Address—media access control (MAC) address of the
WLAN IP Telephony Manager 2245 (hexadecimal).
• System Uptime—the number of days, hours, and minutes since the
WLAN IP Telephony Manager 2245 was last reset.
• Net—the type of connection to the Ethernet switch currently utilized.
Displayed as 10 (10BaseT) or 100 (100BaseT) half-duplex, or
full-duplex.
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 03.04 Standard
23 September 2008
Copyright © 2004–2008 Nortel Networks
.