User's Manual

48 Chapter 2 Telephony hardware
P0609324 01
Telephones and adapters
The following telephones and devices can be used with the Business Communications Manager
system.
Business Series Terminals
7100 — one-line
display, one
memory button
without indicator.
7000 (not shown)
(International only)
— four memory
buttons, no display
or indicators.
Business Series
Terminal 7208 —
one-line display, eight
memory buttons with
indicators
7316 — two-line
display, three
display buttons,
16 memory
buttons with
indicators, eight
memory buttons
without indicators.
7316E — two-line display, three display buttons, 16 memory buttons
with indicators, eight memory buttons without indicators.
This telephone performs as a T7316 telephone on systems prior to
BCM 3.5. On systems running BCM 3.5 and newer software, the
button numbering changes, the mute button under the dial pad is
active, and the telephone can support one or more Key Indicator
Modules (KIMs) to create a Central Answer Position (CAP).
7316E+KIM (Key
Indicator Module) — Each KIM has 24 programmable
buttons with displays. On an Ordinary Kim (OKIM), the
buttons can be programmed as memory buttons, with
internal and external autodial numbers and feature codes.
If the T7316E is configured in the system as an enhanced
CAP (eCAP), the KIM becomes an enhanced KIM (eKIM)
and can support line assignments, multiples of the same
target line, and hunt group designators, as well as memory
key functions.