Network Device Maintenance and Diagnostics

June 2007 Monitoring multimedia hardware
1005r Server Maintenance and Diagnostics 85
Viewing the last diagnostics result
You can review the results of diagnostics by clicking the Get Last Results
button for a component.
To view the last diagnostics result
1 Run CallPilot Manager and log on.
2 In CallPilot Manager, click Maintenance > Maintenance Admin.
Result: The Maintenance screen appears.
3 Click the plus sign (+) beside the CallPilot server to expand the
component tree.
4 Continue clicking the plus signs (+) until the component you want to
work with is visible.
5 Click the hardware component for which you want to run diagnostics
with.
Result: The Maintenance screen refreshes to show details about
the component.
6 Scroll down to the Diagnostics section.
7 Select the check box for each diagnostic for which you want to
review results.
8 Click Get Last Result.
Result: The results appear in the Diagnostic Results box with the
following information:
diagnostic title
ATTENTION
Nortel recommends that you courtesy stop rather than stop
a component if possible. For instructions, see “Starting and
stopping components” on page 78.